Manual Silvercrest SBB 850 C1 - IAN 270356 (page 38 of 48) (English, German)

646206

Zoom out

Zoom in

1/48

SBB 850 C1

WARNING! RISK OF FIRE!

► Never use quantities greater than those speci-

ﬁ ed. If there is too much dough, some could

spill over the baking mould 7, drop onto the

hot heating elements and cause a ﬁ re.

■ Ensure that you measure the ingredients precisely.

Even small deviations from the quantities speciﬁ ed

in the recipe may aﬀ ect the baking results.

Baking bread

Preparation

NOTE

►

Place the bread maker on a level and ﬁ rm

surface.

1) Pull the baking mould 7 upwards and out of

the appliance.

2) Push the kneading blades 6 onto the drive

shafts in the baking mould 7. Ensure that they

are ﬁ rmly seated.

3) Add the ingredients into the baking mould 7.

First add the liquids, sugar and salt, then the

ﬂ our. Add the yeast as the last ingredient.

NOTE

►

Ensure that the yeast does not come into

contact with salt or liquids.

4) Insert the baking mould 7 again. Ensure that it

clicks into place correctly.

5) Close the appliance lid 2.

6) Put the power plug into the mains power socket.

You will hear a beep and the programme

number and the duration for programme 1

will appear on the display .

7) Select the programme you want using the

programme select button . Every input is

acknowledged with a beep.

8) If necessary, use button  to select the size

of bread you want to bake.

9) Select the required level of browning  for

your bread. The arrow on the display  shows

you if you have selected, light, medium or dark.

Here you can also select the setting "Super

Rapid" to shorten the time during which the

dough rises.

NOTE

►

A browning level cannot be selected for

programmes 6, 7 and 11.

The function "Rapid" is only available for

programmes 1–4.

A bread weight cannot be selected for pro-

grammes 6, 7, 11 and 12.

10) You now have the option of setting the end time

of your programme using the timer function.

You can enter in a maximum time delay of up

to 15 hours.

NOTE

►

This function is not available for programme 11.

Starting a programme

Start the programme with the Start/Stop button .

NOTE

►

Programmes 1, 2, 3, 4, 6 and 8 start with a

10 to 30 minute preheating phase (except

Super Rapid, see table for programme se-

quences). The kneading blades 6 do not move.

This is not a malfunction of the appliance.

The programme will carry out the various operations

automatically.

You can monitor the programme sequence through

the viewing window 1 of your bread maker.

Occasionally, condensation may build up on the

viewing window 1 during baking. The appliance

lid 2 may be opened during the kneading phase.

NOTE

►

Do not open the appliance lid 2 during the

rising or baking phases. The bread could

collapse.

IB_270356_SBB850C1_LB1.indb 35 24.08.15 14:26

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBB 850 C1 - IAN 270356 in the language / languages: English, German as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SBB 850 C1 - IAN 270356

Silvercrest SBB 850 C1 - IAN 270356 Manual - English, German, Dutch - 50 pages

Silvercrest SBB 850 C1 - IAN 270356 User Manual - Dutch - 90 pages

Silvercrest SBB 850 C1 - IAN 270356 Manual - French - 50 pages

Silvercrest SBB 850 C1 - IAN 270356 User Manual - French - 66 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info