576620

Silvercrest SAB 160 B2 - IAN 101293 Manual

13
Zoom out
Zoom in
Previous page
1/118
Next page
9
SAB 160 B2
GB
IE
NOTE
►
Ensure that a permanent plus connection is applied to the station memory
of connector 4 in ISO Block A
28
.
► In some vehicle models, the default assignment of connectors [4] and [7] in
ISO Block A are interchanged at the factory. If this is the case, the station
memory can be lost. To remedy this, connectors 7 (ignition positive) and 4
(permanent plus) in ISO Block A must be swapped. To do this, connect the
supplied adapter cable
42
between the ISO-Block A on the car stereo and
the car wiring harness. Use the adapter cable to connect the red wire of
the ISO plug to the green wire in the ISO socket, and the yellow wire of the
ISO plug to the red wire in the ISO socket (see also back fold-out page)
CAUTION
►
When using the adapter cable for the ISO Block A, both connections (red
and yellow wires) must be connected together. Otherwise there is a risk of
a short circuit!
Aerial control voltage connection
CAUTION
Possible damage to the device
► Never load the aerial control voltage with the motor power cable or other
power consumers.
The connector for the aerial control voltage is available for a relay-controlled
aerial. The relay then automatically extends the aerial out when the device is
switched on. When switched off , the aerial retracts back in. This connector can
also be used to control an external amplifi er. For exact connector information,
please consult the operating instructions for the amplifi er.
Connection of an external amplifi er
For the connection of an external amplifi er use the audio cinch output LINE
OUT
31
. Follow the operating instructions for the external amplifi er when
doing this.
Connecting an external subwoofer
Use the orange SUB-W cinch output
30
to connect an external subwoofer.
To do this, follow the operating instructions for the external subwoofer.
IB_101293_SAB160B2_LB3.indb 9 07.07.14 16:08
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SAB 160 B2 - IAN 101293 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SAB 160 B2 - IAN 101293 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info