576620
15
Zoom out
Zoom in
Previous page
1/118
Next page
11
SAB 160 B2
GB
IE
To avoid malfunctions, the installation angle should be less than 30°.
Do not install the device where it is subjected to high temperatures (i.e. direct
sunlight or heating vents), heavy contamination or strong vibrations.
Should modifi cations to the vehicle be necessary, contact your vehicle dealer
or specialist workshop.
Installing the device into the ISO bay
Pull the installation bracket
39
and the bezel frame
38
from the device's
housing. Use the supplied key
40
(see also chapter "Removing the device").
Place the installation bracket into the ISO mounting bay.
Bend the tabs on the installation bracket with a screwdriver so that the
bracket is fi xed fi rmly into the mounting bay (see diagram).
Check to ensure the bracket is securely fi xed.
Connect the ISO socket block of the device to the two ISO plugs on your
vehicle.
Connect the cable from the vehicle aerial to the aerial socket
32
on the
device. Any vehicle-specifi c ISO adapters you may require can be sourced
from a specialist workshop, a local dealer or a general store's technical
department.
Feed the microphone unit cable into the mounting duct and connect it to the
microphone unit socket
25
. Run the cable in such a way that the micro-
phone unit can be secured in the vehicle interior later, see also the section
"Using the microphone".
If required, connect the audio cinch cable of an external amplifi er to the
LINE OUT socket
31
on the device.
If required, connect the audio cinch cable of an external subwoofer to the
orange SUB-W cinch socket
30
on the device.
Protect your device against theft with additional measures as required.
Attach the securing screw with the anchoring plate
41
and the securing
material to the engine fi rewall of the vehicle.
IB_101293_SAB160B2_LB3.indb 11 07.07.14 16:08
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SAB 160 B2 - IAN 101293 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SAB 160 B2 - IAN 101293 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info