620568

Silvercrest KM 250 A1 - IAN 270290 Manual

29
Zoom out
Zoom in
Previous page
1/34
Next page
26
KM 250 A1
GB
Food processing attachments
1) Select the desired attachment:
– the slicer attachment 3
– or the grater attachment -.
2) If another attachment is still installed: press the
long metal tab of the attachment inwards and
slide the attachment out of the disc adapter
using the metal tab as an aid. You can now lift
the catch at the other end of the attachment
out of the disc adapter .
3) Insert the new attachment with the catch first
into the disc adapter .
4) Then carefully push the side with the large
metal tab into the disc adapter . The best
way to do this is to press with both thumbs on
the outer edges of the attachment until it clicks
completely into place in the disc adapter .
5) Place the disc adapter with the attachment
fitted onto the drive shaft . The flattened side
of the drive shaft must correctly fit into the
take up of the disc adapter . Otherwise the
disc adapter cannot be properly attached.
6) Place the lid onto the bowl so that the
arrow
on the lid coincides with the
arrow
and the opened lock symbol
on the bowl .
7) Turn the lid until the arrow
on the lid
points to the arrow
and the closed lock
symbol
on the bowl .
8) Place the pusher into the feed tube .
9) Insert the plug into a mains power socket.
Operation
Using the cutting blades
The cutting blades can be used to chop foods
such as onions or meat.
NOTE
► Do not attempt to mix liquids with the cutting
blades . These will overflow or spray out.
1) Fit the cutting blades as described in the
chapter "Assembling the appliance".
2) Cut the ingredients into pieces of approxi-
mately 2–3 cm.
3) Pour the ingredients in. Do not exceed the
quantities specified in the following table.
INGREDIENT
MAX.
AMOUNT
SPEED
Bread max. 80 g ON
Cheese max. 150 g ON
Meat max. 300 g ON
Herbs max. 30 g ON
Garlic 80–200 g PULSE
Onions max. 300 g PULSE
Ice cubes max. 140 g PULSE
NOTE
► The speeds given in the table are intended as
reference values. These can vary depending
on the quality and quantity of the ingredients!
4) Close the lid .
… 29 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-km-250-a1---ian-270290

Reset search

  • I would like to purchase a replacement blade mechanism for my KM250A1 Submitted on 13-3-2024 at 11:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KM 250 A1 - IAN 270290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KM 250 A1 - IAN 270290 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info