620568

Silvercrest KM 250 A1 - IAN 270290 Manual

28
Zoom out
Zoom in
Previous page
1/34
Next page
25
KM 250 A1
GB
Before first use
■ Remove all packaging materials from the appli-
ance.
■ Clean the appliance as described in the section
"Cleaning and care".
■ Ensure that all parts are completely dry before
operating the appliance.
Assembling the appliance
NOTE
► The appliance will not start until the bowl
and the lid are correctly attached.
1) Place the motor unit on a flat surface so
that the sucker feet can attach firmly and the
appliance stands firmly in place.
2) Place the bowl onto the motor unit
so that the arrow on the bowl points
towards the open lock symbol
on the
motor unit . Then turn the bowl until the
arrow
points to the closed lock symbol
and the bowl clicks into place.
If you want to work with the cutting blades ,
assemble the appliance as described in the section
"Cutting blades".
If you want to work with the food processing at-
tachments, assemble the appliance as described
in the section "Food processing attachments".
Cutting blades
1) Place the cutting blades onto the drive
shaft . The flattened side of the drive shaft
must correctly fit into the take up of the cutting
blades . Otherwise the cutting blades
cannot be properly attached.
2) Place the lid onto the bowl so that the
arrow on the lid coincides with the
arrow
and the opened lock symbol
on the bowl .
3) Turn the lid until the arrow
on the lid
points to the arrow
and the closed lock
symbol
on the bowl .
4) Place the pusher into the feed tube .
5) Insert the plug into a mains power socket.
WARNING! RISK OF INJURY!
► To avoid personal injury and damage to the appliance, never insert or
place your hands or any foreign objects into the feed tube.
► Do not change accessories unless the drive is stationary and the mixer is
unplugged from the power supply! The appliance will run on for a short
time after being switched off!
► Never leave the appliance unattended!
► Before changing accessories or additional parts that are in motion during
operation, the appliance must be switched off and disconnected from
mains power.
… 28 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-km-250-a1---ian-270290

Reset search

  • I would like to purchase a replacement blade mechanism for my KM250A1 Submitted on 13-3-2024 at 11:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KM 250 A1 - IAN 270290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KM 250 A1 - IAN 270290 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info