118074
8
Zoom out
Zoom in
Previous page
1/16
Next page
10 GB
- Position loudspeakers as such on the shelf
that the front edge stands flush with the
edge of the shelf.
- To avoid booming, place a rubber mat under
the loudspeakers.
5. Use the cinch connections AUX IN
H
to con-
nect an external unit (e.g. turntable
1
).
6. For FM radio reception connect a 75 Ohm
antenna (house antenna, cable connection;
only possible for the following models: Ger-
many, Netherlands, Austria, Finland, Sweden,
Norway) to the antenna connection ANT
K
. If
this is not available then attach the supplied
longwire antenna to the centre contact of the
antenna connection. The antenna for AM con-
nection is already built into the unit.
7. Connect the plug into a 230 V outlet.
8. Insert suitable batteries (not included in the
delivery) into the remote control (2x AAA LR03
1.5 V):
- Open the cover to the rear of the remote
control.
- Insert the batteries. Observe the correct
polarity (see indication to the bottom of the
battery compartment).
- Close the cover again.
1
Only turntables without magnetic systems
are suitable for connection to this Designer
Audio Unit!
˿ Wall-mounting
The designer system and speakers can be
wall-mounted. The required screws and wall-
mountings are included in the delivery. Attach the
system vertically to a stable wall.
The holes for the screws must be drilled vertically
at a distance of 14 cm.
For the screws to grip correctly into the mount-
ings
L
to the rear of the designer system and
the loudspeakers the heads of the screws must
protrude approx. 3 mm from the wall.
˿ Switching on and off
[ » POWER/STAND-BY « ]
· When connecting the plug the system goes
into stand-by mode. Set the time while in
stand-by mode (see „Setting the clock“,
page 11).
· Activate POWER
F
to switch between operat-
ing mode and stand-by mode.
· During longer periods of absence disconnect
the plug.
˿ Select system/sound source
[ » CD/TUNER/TAPE/AUX « ]
· Activate one of the following buttons to select
an audio unit or to change the sound source:
CD/MP3
R
a: CD player/MP3 player
TUNER/BAND
R
b: Radio
TAPE
R
c: Cassette player
AUX
R
d: External unit, e.g. turntable
1
1
Only turntables without magnetic systems
are suitable for connection to this Designer
Audio Unit!
˿ Set volume
[ » VOLUME/MUTE « ]
· Press VOL/UP
A
to increase the volume.
· Press VOL/DN
p
to decrease the volume.
· Press MUTE
[
to mute the loudspeakers and
the headphones. Press again to deactivate
this function.
Operation: General
o this
2315_UK_Inhalt.indd 102315_UK_Inhalt.indd 10 29.10.2004 11:37:27 Uhr29.10.2004 11:37:27 Uhr
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH2315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH2315 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info