569402

Silvercrest KH 2131 - IAN 53669 Manual

11
Zoom out
Zoom in
Previous page
1/72
Next page
9
Handling and operation
KH 2131
GB
IE
Connecting the transmitter
Insert the jackplug of the cinchplug - jackplug cable
22
in the AV1 IN
socket
8
of the transmitter.
Connect the cinch plug of the cinchplug - jackplug cable
22
to the signal
source, for example, a DVD player. Pay heed to the colour coding.
If the signal source makes the output signals available to you via a Scart
output, use also the Scart to cinchplug adapter OUT (Transmitter)
24
.
If need be, you can connect a second signal source to the transmitter.
For this, use the socket AV2 IN
9
.
NOTICE
If, despite an occupied A/V output, you wish to additionally connect the ►
used signal source to a TV, connect the TV with the transmitter via the
sock
et TO TV
7
. To do this, use either one of the supplied cinchplug -
jackplug cables
22
, or an identical cable from a dealer (see Figure
Connection example transmitter).
Connect the infrared transmission diode cable
25
to the socket IR
6
of the
transmitter.
Aim one of the three transmitter diodes at the device to be remotely controlled.
Attach the transmitter diode at an appropriate location using the supplied
double-sided adhesiv
e pads. The transmitting diode should be affi xed
immediately adjacent to the IR receiving diode on your device (see Fig.
Connection example Transmitter).
Connect one of the power adapters to the DC IN
10
socket of the transmitter
and then plug it into a properly installed mains power socket.
Unfold the transmission antenna
and point it in the direction of the receiver.
Connecting the receiver
Connect the video output
18
and the audio outputs
19
to the target device,
e.g. a television. For this, use the supplied Cinch to Cinch cable
27
.
Pay heed to the colour coding.
If the target device has a Scart input, use additionally the Scart - Cinch
adapter IN (Receiver)
23
.
Connect one of the power adapters to the DC IN
20
socket of the receiver
and then plug it into a properly installed mains power socket.
Unfold the transmission antenna
13
and point it in the direction of the transmitter.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH 2131 - IAN 53669 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH 2131 - IAN 53669 in the language / languages: English, German, Danish, Swedish, Finnish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest KH 2131 - IAN 53669

Silvercrest KH 2131 - IAN 53669 User Manual - German, Dutch, French, Italian - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info