569402

Silvercrest KH 2131 - IAN 53669 Manual

9
Zoom out
Zoom in
Previous page
1/72
Next page
7
Setting up and connecting
KH 2131
GB
IE
Disposal of the packaging
The packaging protects the device from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed according to the regionally established regulations.
NOTICE
If possible preserve the device's original packaging during the warranty ►
period so that in the case of a warranty claim you can package the device
pr
operly for return.
Requirements on the Installation Location
For the safe and error-free operation of the device, the installation location must
fulfi ll the following conditions:
Place the device on a fi rm, fl at and level surface. ■
Do not locate the device in a hot, wet or very humid environment or close to ■
fl ammable material.
The sur
faces of furniture may contain components that could attack and ■
weaken the rubber pads of the device. If necessary, place an anti-slip mat or
similar under the rubber pads of the de
vice.
The mains power socket must at all times be easily accessible, so that the ■
power adapter can be easily and quickly removed if necessary.
Electrical connections
Before connecting up, compare the connection data (voltage and frequency) ■
on the type plate of the device with that of your power supply network.
This data must tally in order to avoid damage to the device.
Check to ensure that the power cable of the device is undamaged and that it ■
will not be laid over hot surfaces and/or sharp edges.
Ensur
e that the power cable is not over taut or crimped/folded. ■
Do not let the power cable hang over edges (trip wire eff ect). ■
NOTICE
It is recommended that, in addition to switching the radio transmission set ►
off , you disconnect the power adapter from the mains power supply or
use switchable po
wer strips. Only in this way can it be ensured that the
device is fully switched off and a contribution made to the economical use
of power.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH 2131 - IAN 53669 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH 2131 - IAN 53669 in the language / languages: English, German, Danish, Swedish, Finnish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest KH 2131 - IAN 53669

Silvercrest KH 2131 - IAN 53669 User Manual - German, Dutch, French, Italian - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info