Manual Silvercrest IAN 61433 (page 19 of 80) (English, German, Dutch, French, Italian, Portuguese)

737635

Zoom out

Zoom in

1/80

English 19

Pull the terry cloth (D2) cover over the man-

ual nozzle. Especially well-suited for small

washable areas, shower stalls, mirrors or

furniture cloth material.

Suited for all washable wall and floor cover-

ings, e.g. stone floors, tiles and PVC floors.

Work slowly on very dirty surfaces to allow

the steam to act on the dirt for a longer pe-

riod of time.

Note:Detergent residue or care emulsions

that are still present on the surfaces to be

cleaned, can lead to smears when steam

cleaned. However, these will disappear

with repeated cleaning procedures.

Î Illustration

Attach the floor cloth to the floor nozzle.

1 Fold the floor cloth (F3) the long way

and place the floor nozzle (F1) on top of

it.

2 Open holding clamps (F2).

3 Place the cloth ends into the openings.

4 Close the holding clamps.

Caution

Do not insert fingers between the clamps.

Î Illustration

During work breaks:

Hook the floor nozzle (F1) into the park-

ing holder (A6).

 Danger

Always disconnect the mains plug (A7) and

allow the steam cleaner to cool down be-

fore performing any maintenance work.

Rinse the steam cleaner boiler at the latest

after 5 boiler fillings.

Î Fill the boiler with water and shake it

strongly. This dissolves lime scaling re-

siding on the boiler bottom.

Î Empty water out.

Note: If you always use usual commercial

distilled water it is not necessary to descale

the boiler.

As limescale builds up on the boiler walls,

we recommend to descale the boiler in the

following intervals (RF=reservoir fillings):

Note: Please contact your Conservancy

Board or the local water supply company to

inquire about the hardness of your water.

Î Disconnect the mains plug (A7) from

the socket.

Î Completely empty the steam boiler.

몇 Warning

Use a commercially available descaler to

descale your unit.

Caution

Use caution when filling and emptying the

steam cleaner. The descaling solution can

have an aggressive effect on delicate sur-

faces.

Î Pour the descaling solution into the boil-

er and allow it to react for approximately

8 hours.

Manual nozzle (D1)

Floor nozzle (F1)

Parking the floor nozzle

Maintenance and care

Rinsing the boiler

Descaling the boiler

Degree of hardness ° dH mmol/l RF

I soft 0- 7 0-1,3 55

II medium 7-14 1,3-2,5 45

III hard 14-21 2,5-3,8 35

IV very hard >21 >3,8 25

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 61433 in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 61433 Manual

Product: