737635

Silvercrest IAN 61433 Manual

17
Zoom out
Zoom in
Previous page
1/80
Next page
English 17
Î Illustration
To detach the accessory parts, press
the unlocking button (B2 or E2), and
pull the items apart.
Note: If you always use usual commercial
distilled water it is not necessary to descale
the boiler.
Caution
Do not use condensation water from the
drier!
Do not fill in detergents or other additives!
Î Remove the safety cap (A4) from the
device.
Î Empty remaining water from boiler.
Î Fill the boiler with a minimum of 0.2 litres
and a maximum of 1.0 litres of fresh tap
water
Note: You can cut down the heating-up
time by using warm water.
Î Screw the safety cap (A4) back onto the
device.
Î Place the unit securely on a firm sur-
face.
Caution
The appliance must not be carried during
cleaning.
Î Insert the mains plug (A7) into a socket.
Both indicator lamps (A2/A3) must illu-
minate.
Caution
Do not turn the appliance on without water
in the boiler. Otherwise, the appliance may
overheat (see Help with faults).
Î The orange indicator lamp (A3) goes
out after approximately 7 minutes.
The steam cleaner is ready to use.
Î Push the steam switch lock (B3) to the
back.
Note: If you push the lock forward, the
steam switch cannot be actuated (child
control).
Î Operate the steam switch (B4) and di-
rect the emerging steam jet to a cloth
until the steam emerges evenly.
Note: The heating of the steam cleaner
is turned on in regular intervals during
the operation of the appliance in order
to maintain the pressure in the boiler at
a constant level. When the heating is
turned on, the orange indicator lamp
(heater) lights up.
Î Use the steam switch (B4) to regulate
the discharged steam.
Î The lock of the steam switch (B3) also
allows for steam volume regulation.
– Switch in front position: no steam (child
control)
– Switch in middle position: reduced
steam amount
– Switch in back position: maximum
steam amount
Water needs to be filled into the boiler, if the
steam volume decreases during work and
no more steam is emitted in the end.
Note: The safety lock (A4) cannot be
opened as long as slight pressure remains
in the boiler.
Î Disconnect the mains plug (A7) from
the socket.
Î Push the steam lever (B4) until steam
discharge stops. Now, the boiler of the
appliance is unpressurized.
Î Remove the safety cap (A4) from the
device.
Danger
A residual amount of steam may be emitted
when you open the safety lock. Be careful
when opening the safety lock, there is a risk
of scalding.
Î Fill the boiler with a minimum of 0.2 litres
and a maximum of 1.0 litres of fresh tap
water
Fill up with water
Turning on the Appliance
Adjusting the Steam Quantity
Refilling Water
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 61433 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 61433 in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info