749467
40
Zoom out
Zoom in
Previous page
1/154
Next page
SilverCrest SMA 500 E1
38 - English
8. Maintenance/cleaning
DANGER of electric shock
Always remove the plug from the power socket before beginning to clean the base
(11). Otherwise, there is a risk of electric shock.
Do not pour or spray any liquids onto the base (11) or immerse it into water or any
other liquids. Otherwise, there is a risk of electric shock and a fire hazard due to short
circuits.
DANGER of burn injuries
Wait until the canister (7) has cooled down completely before cleaning it. Otherwise
you could burn yourself.
WARNING of damage to property
Do not use any scratching or abrasive cleaning agents or abrasive objects (such as a
metal scourer) for cleaning purposes. Otherwise the milk frother may be damaged.
Never clean the canister (7) under running water. When cleaning, please make sure
that no water gets into the canister (7) from underneath or through the control panel!
Do not clean the milk frother (7) and its accessories in the dishwasher, as this may
cause irreparable damage.
Ideally, cleaning is carried out directly after the canister (7) cools down. This way, any
milk residues cannot dry.
8.1 Simple cleaning process:
Leave the whisk (4, 5) that was used in place.
Fill the canister (7) with water considering the MIN and MAX markings and place the lid (2)
onto it.
Allow the milk frother to run for around 30 seconds.
Next, rinse the canister (7) with plenty of clean water and rinse the lid (2) under running water.
8.2 Thorough cleaning process:
Remove the power cable (12) from the power socket.
Remove the whisk (4, 5) that was used.
Clean the interior of the canister (7) with warm water and some washing up-liquid. Use a
sponge or a soft cloth. Make sure to remove milk residue in and around the whisk drive shaft.
Next, rinse the canister (7) with plenty of clean water.
Remove the cover seal (3) from the lid (2) and clean the two parts in mild rinse water. Rinse
with clean water, dry both parts thoroughly and position the cover seal (3) back on the lid (2).
Clean whisks A and B (4, 5) in mild rinse water and rinse with clean water.
Next, rinse the canister (7) with plenty of clean water and rinse the lid (2) under running water.
Clean the outer surfaces, the base (11) and the power cable (12) with a soft, damp cloth,
using a mild detergent for stubborn stains. Dry all of the parts thoroughly.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 356365 SMA 500 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 356365 SMA 500 E1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info