Manual Silvercrest IAN 347713 SVEB 160 A1 (page 28 of 141) (English, German, Dutch, French, Polish)

749527

Zoom out

Zoom in

1/141

26 GB

~Let the device cool down completely be-

fore winding up the power cable.

~Ensure that the power cable cannot be

trapped or crushed.

~To pull the mains plug out of the wall

socket, always pull on the mains plug,

and never on the power cable.

~Disconnect the mains plug from the wall

socket …

…after every use,

…if there is a fault,

…when you are not using the device,

…before you clean the device and

…during thunderstorms.

DANGER - Fire hazard

~Never leave the device unattended

while it is plugged in.

~Use the device on a stable, level and

heat-resistant surface.

~Never cover the device when connect-

ed due to possible overheating and fire

hazard!

~Do not use the device in the vicinity of

flammable materials or flammable gas-

es.

DANGER! Risk of injury

through burning

~The welding wire becomes very hot dur-

ing operation. Do not touch the hot

welding wire.

~Allow the device to cool down com-

pletely before you clean it or put it

away.

DANGER! Risk of injury

~Ensure that you never vacuum your skin,

hair or clothing with the adapters.

DANGER caused by

insufficient hygiene

~For a carefree enjoyment of your vacu-

um-sealed food, you should always

comply with the following hygiene tips:

- During the preparation and packag-

ing of the food make sure that the en-

tire equipment is perfectly clean.

- Clean the vacuum sealer and all de-

vices thoroughly after use.

- Perishable food should be cooled or

frozen immediately after sealing.

- After thawing or heating perishable

food, this must be consumed immedi-

ately.

WARNING! Risk of material damage

~The device needs to cool down after the

sealing and/or vacuum-packing pro-

cess.

To protect the device, an automatic lock

is briefly activated between two sealing

processes. The duration of this lock de-

pends on the function being used.

~Only use special plastic film bags that are

suitable for use with vacuum sealers /

bag sealers.

~Never place the device on hot surfaces

(e.g. hot plates) or near to heat sources

or open fire.

~Ensure that no liquid is sucked in during

the extraction of air.

~The device is fitted with non-slip plastic

feet. As furniture is coated with a varie-

ty of different varnishes and acrylics,

and treated with different cleaning

agents, it cannot be completely ruled

out that components are contained in

some of these substances that could

damage and soften the plastic feet. If

necessary, place a non-slip mat under

the device.

~Do not clean using sharp objects or

abrasive cleaning agents.

__347713_Vakuumierer_B8.book Seite 26 Montag, 27. Juli 2020 12:36 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 347713 SVEB 160 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 347713 SVEB 160 A1 Manual

Product: