Manual Silvercrest IAN 339339 SWUB 85 D3 (page 21 of 77) (English, German, Dutch, French, Polish)

749702

Zoom out

Zoom in

1/77

21 GB/IE

Ensure that the heated underblanket is completely

ﬂat and that it does not become drawn together

or folded during use.

Before use on an adjustable bed, verify the

heated underblanket and the cables will not be

pinched in the hinges, for example, or pushed

together.

Switch the heated underblanket on approxi-

mately 30 minutes before going to bed and

cover it with the top sheet and other bedding.

By doing this you will keep all the heat in.

Switching on / oﬀ / Selecting

the temperature

Switching on:

Using the temperature setting switch 3 on the

control unit 1, set the temperature to setting

1, 2, 3, 4, 5 or 6 to switch on the heated under-

blanket. The function indicator 2 illuminates.

Switching off:

Using the temperature setting switch 3 on the

control unit 1, set the temperature to setting 0

to switch oﬀ the heated underblanket. The

function indicator 2 ceases to illuminate.

Selecting the temperature:

This heated underblanket has a rapid heat-up

feature. Set the control unit to the highest tem-

perature setting (setting 6). This will cause the

heated underblanket to warm up quickly.

When operating

the heated underblanket for several

hours, we recommend setting the

control unit 1 to the lowest temper-

ature to prevent the body from over-

heating, potentially resulting in burns

to the skin or heat stroke.

Temperature levels

Using the temperature setting switch 3 on

the control unit 1, set the temperature to the

desired temperature setting (see Fig. A).

Setting 0: Oﬀ

Setting 1: Minimum heat

Settings 2–5: Customised heat

Setting 6: Maximum heat

The foot zone is the warmest part of the heated

underblanket.

Note: This heated underblanket has overheating

protection. After a period of approx. 3 hours at tem-

perature settings 5 or 6, the heated underblanket

automatically switches down to setting 4.

Selecting the automatic

switch-oﬀ time

Using the switch-oﬀ time setting switch 4 on

the control unit 1, set the desired switch-oﬀ

time. The switch-oﬀ time can be set to 1, 3, 6 or

12 hours. After the expiry of the set switch-oﬀ

time, the heated underblanket no longer provides

heat and the function indicator 2 starts to ﬂash.

To heat up the heated underblanket again, ﬁrst

set the temperature setting switch 3 to setting

0 and then choose the desired temperature

setting.

If the heated underblanket is no longer

being used after the timer expires:

– switch oﬀ the heated underblanket (setting 0),

– unplug from the socket,

– disconnect the plug-in connection 5, thus the

control unit 1, from the heated underblanket.

Preparations for use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 339339 SWUB 85 D3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 339339 SWUB 85 D3 Manual

Product: