749702

Silvercrest IAN 339339 SWUB 85 D3 Manual

20
Zoom out
Zoom in
Previous page
1/77
Next page
20 GB/IE
–
place objects on it (e.g. suitc
ases
or clothes baskets),
– place a heating source such
as a hot-water bottle, heating
pad or similar items on it. The
heated underblanket may o
ther-
wise be damaged.
The electronic components inside
the control unit 1 will heat up
whilst operating the heated un-
derblanket. Therefore never cover
the control unit 1 or place it onto
the heated underblanket during
operation. This poses a risk of
injuries and / or damage to the
heated underblanket.
Always observe the information
on start-up, cleaning and care,
and storage.
If you have additional questions
on using our products, please
contact our Customer Service
Department.
Safety system
Note: The heated underblanket is fitted with a
safety system. Its electronic sensor system prevents
the heated underblanket from overheating over its
full area by switching it off automatically in the event
of a fault. If the safety system switches the heated
underblanket off automatically due to a fault, then
the function indicator
2
on the control unit
1
ceases
to illuminate, even if the heated underblanket is
switched on.
Under no circumstances should you connect the
defective heated underblanket to another switch
of the same type. This would also result in a
permanent shutdown by the safety system in
the switch.
Please note that, for safety reasons, the heated
underblanket must not be used in the event of
a fault and must be sent to the service centre
address given below.
Special characteristics
This heated underblanket has been provided with an
especially soft and hygienic soft nonwoven fabric.
The textiles used in this heated underblanket meet
the high human ecological safety requirements of
the Oeko-Tex Standard 100 as proven in tests at
the Hohenstein Research Institute.
Preparations for use
Placing the heated underblanket
Starting at the foot end, spread out the heated
underblanket (top, see Fig. B) over the mattress.
The plug-in connector
5
on the heated underblan-
ke
t should be towards the head end (see Fig. C).
First connect the control unit 1 to the heated
underblanket by plugging the two parts of the
plug-in connector 5 together (see Fig. D).
RISK OF DAMAGE TO THE
PRODUCT AND / OR OTHER
PROPERTY! Please be sure
– the plug-in connector 5 and the cable do
not get pinched on the bedframe.
– the cable does not get wedged between the
bedframe and the mattress.
– the cable does not get severely kinked.
Otherwise the plug-in connector 5 and the
cable could be damaged.
Then place the bottom sheet as usual over
the heated underblanket, so that the heated
underblanket lies between the mattress and
the bottom sheet.
Important safety … / Safety system / Special characteristics / Preparations for use
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 339339 SWUB 85 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 339339 SWUB 85 D3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info