750504

Silvercrest IAN 338924 SKMC 1200 C3 Manual

28
Zoom out
Zoom in
Previous page
1/40
Next page
28 GB
14. Dough kneading
With this device you can process up to a maximum of 500 g
flour for heavy doughs and 600 g flour for light doughs.
The program is only operated with the blade assembly19.
14.1 General program information
- Preset time: 45 seconds (adjustable)
- Maximum time: 2 minutes
- Preset temperature: 0 °C (fixed)
- Preset speed: 4 (fixed)
- Clockwise/anti-clockwise rotation: is controlled by the
program
14.2 Starting the program
1. Fill food into the blender jug5.
2. Close the blender jug5 with the lid24.
3. The device is switched on and shows the start menu.
4. Press the button to enter the automatic programs
menu and then the KNEADING44 and ---> buttons.
The values for the program appear in the three dis-
play dials.
NOTE: you can change the values for the time. Tap the
time display dial and make the setting.
5. Press the X35 button. The program is started. The
time set is counted down on the touchscreen8. The
program automatically controls the anti-clockwise/
clockwise rotation.
6. After the set time has elapsed, a short signal sounds,
the LED ring10 around the control dial9 is lit green
and the touchscreen8 shows the output values of the
program again.
7. Press the on/off switch7 to switch off the device or
move to the next step in the recipe.
14.3 Pause and end
• To stop a program which is running, press:
-II: the time is no longer counted down.
- End pause by pressing X35.
• To end a program which is running, press
- the button 37. The display dials once again
show the presetting of the program.
- Press the button to enter the automatic programs
menu.
15. Browning
With this program, you can slightly brown up to 500 g
meat, fish, vegetables, e.g. to release roasting flavours.
Large pieces must first be cut up into chunks.
15.1 General program information
- Preset time: 7 minutes (adjustable)
- Maximum time: 14 minutes
- Preset temperature: 130 °C (adjustable)
- Preset speed: 1 (fixed)
- Clockwise/anti-clockwise rotation: is controlled by the
program
15.2 Starting the program
1. Put some fat (e.g. oil) into the blender jug5.
2. Fill food into the blender jug5.
3. Close the blender jug5 with the lid24.
4. The device is switched on and shows the start menu.
5. Press the button to enter the automatic programs
menu and then the ROASTING42 and ---> buttons.
The values for the program appear in the three dis-
play dials.
NOTE: you can change the values for time and tempera-
ture. Tap the corresponding display dial and adjust with
the control dial.
__338924_1907_MC-Connect_GB_online.book Seite 28 Donnerstag, 12. Dezember 2019 10:09 10
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 338924 SKMC 1200 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 338924 SKMC 1200 C3 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 338924 SKMC 1200 C3

Silvercrest IAN 338924 SKMC 1200 C3 User Manual - German - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info