750504
27
Zoom out
Zoom in
Previous page
1/40
Next page
27
GB
5. After the set time has elapsed, a short signal sounds,
the LED ring10 is lit green and the touchscreen8
shows the output values of the program again.
6. Press the on/off switch7 to switch off the device or
move to the next step in the recipe.
DANGER! Risk of injury through scalding!
~When opening the lid1 or24 during operation, hot
steam may escape.
7. Remove the food from the steamer attachments2/3.
13.4 Pause and end
To stop a program which is running, press:
-II: the time is no longer counted down.
- End pause by pressing X35.
To end a program which is running, press:
- the button 37. The display dials once again
show the presetting of the program.
- Press the to enter the automatic programs menu.
13.5 Checking the cooking
temperature
You should ensure that the food is not cooking too long,
since vegetables may become too soft and meat and fish
too dry and tough.
DANGER! Risk of injury through scalding!
~When opening the lid1 during operation, hot steam
may escape.
In order to check the condition of the food to be cooked
from time to time, proceed as follows:
1. Carefully open the lid for the steamer attachments1.
When opening the lid1, make sure not to be hit by a
surge of hot steam. Let the steam escape on the side
away from you before fully opening the lid.
2. Remove the lid1 completely.
3. Check the condition of the food to be cooked with a
longer stick or a fork:
- Once the food to be cooked is done, press button
37 and then the on/off switch7 to switch off the
device.
- If the food to be cooked is not done yet, replace the
lid1 and let the device continue the operation.
13.6 Steaming with the cooking pot
NOTE: you can also use the cooking pot20 when the
steaming function is selected. When you open the lid24
to check the cooking temperature, a message appears in-
dicating that the settings are paused. After putting on the
lid, start the remainder of the program by pressing X35.
1. Fill 500 ml of water into the blender jug5.
2. Fill food into the cooking pot20.
3. Place the cooking pot20 into the blender jug5.
4. Close the blender jug5 with the lid24 and the
measuring beaker25.
5. Start the program (see “Starting the steaming pro-
cess” on page 26).
6. When the program comes to an end, open the lid24
and remove the cooking pot20 (see “Using the spat-
ula” on page 17).
7. Press the on/off switch7 to switch off the device or
move to the next step in the recipe.
13.7 Overheating protection
The device has an overheating protection system. As soon
as there is no water left in the blender jug5 thus causing
the device to become too hot, the device will automatically
switch off.
In this case, pull out the mains plug
16
and allow the device
to cool.
You may then fill in water and put the device back into op-
eration.
13.8 Tips on steaming
Steaming is one of the healthiest methods of cooking food.
Not only nutrients and colour of the food are maintained
to the largest extent possible but also the natural flavour
and texture are the gourmets delight. Thus, it is possible to
use salt, fat and spices sparingly.
13.9 Using the steamer attachments
As required, you can either use only the deep steamer at-
tachment3 or both steamer attachments (2 and3).
The shallow steamer attachment2 cannot be used without
the deep steamer attachment3.
13.10 Preparing menus
If you prepare a whole menu and therefore use both steam-
er attachments on top of one another, please make sure
that:
- Meat and fish should always be cooked in the bottom
steamer attachment3, so that dripping juice will not
come into contact with other food;
- The heaviest food to be cooked should possibly be
placed in the bottom steamer attachment3.
__338924_1907_MC-Connect_GB_online.book Seite 27 Donnerstag, 12. Dezember 2019 10:09 10
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 338924 SKMC 1200 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 338924 SKMC 1200 C3 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 338924 SKMC 1200 C3

Silvercrest IAN 338924 SKMC 1200 C3 User Manual - German - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info