750435
23
Zoom out
Zoom in
Previous page
1/83
Next page
23 GB/IE
1. Turn the headphones and the Bluetooth®
function on. The LED 7 will flash white.
The NFC function is now enabled and
ready for the connection by tapping the
NFC touchpoint 9 of the headphones.
2. Enable your mobile device with both
Bluetooth® and NFC function powered on.
3. Tap the NFC touchpoint of your mobile
device and the NFC touchpoint 9 of the
headphones. Your mobile device may prompt
out a message for Bluetooth® connection for
acceptance.
4. Once the connection between the mobile
device and the headphones is established,
the LED 7 flashes white and then turn OFF.
NOTE: This feature requires your mobile
device to support Bluetooth® pairing via the
NFC feature. Please refer to your owner’s
manual for your mobile device to learn about
this NFC feature.
Clearing paired devices
You can clear up the paired device anytime.
Please press both Vol+ button 3 and
Vol– button 5 together at the same time
for approx. 5 seconds. The memory in the
headphones is cleared
and it will not auto-
connected to the previous
paired communi-
cation device.
Voice announcement
This headphone integrated with voice announce-
ment feature that will let you know existing
product status:
ANC ON / OFF status
Bluetooth® connection status
Rechargeable battery capacity level whilst
Power ON
Connecting the headphones
through audio cable
Insert the 3.5 mm jack plug at one end of
audio cable 16 to 3.5 mm jack socket 11 .
Insert the 3.5 mm jack plug at other end of
audio cable 16 to 3.5 mm jack socket of your
playback device.
When a 3.5 mm cable is plugged into the
3.5 mm jack socket 11 , the Bluetooth® con-
nection will be disconnected. The ANC
function remains ON.
Start a playlist on your playback device.
You can only adjust the music volume on
the playback device.
Active Noise Cancellation
function (ANC)
In order to filter out unwanted noises from
surrounding you can enable the active noise
cancellation (ANC) function.
Press once the ANC button 13 to switch ON /
OFF the ANC function and an acoustic
signal will sound.
Voice control function with
Siri / Google assistant
Please follow below steps to activate the Voice
Control function:
1. First activate Siri or Google assistent on you
mobile device.
For IOS device, please complete the Siri setup
before activate with this voice control function
on headphone. For Android device, please open
the Google assistant function and then follow its
instructions to complete setting before using voice
control function on headphone.
NOTE: Google Assistant is available on
Android 5.0 or above devices.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 331902 SBKL 40 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 331902 SBKL 40 B2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info