750435
22
Zoom out
Zoom in
Previous page
1/83
Next page
22 GB/IE
Battery capacity indicator:
LED indicator
status Battery capacity
Solid green color 51 % to 100 %
Solid amber color 26 % to 50 %
Solid red color less than 25 %
Flashing red color Battery is charging.
Using the headphones
Connect the headphones with a communi-
cation device.
Place the headphones near a switched on
communication device (e.g. mobile or
computer).
Pairing with a new Bluetooth® device: Hold
the On / Off button
13
for approx. 2 seconds
until the LED 7 flashes white. This indicates
the headphones are now ready to connect
mode, which remains active for 5 minutes.
The headphones will switch off if they do not
detect a Bluetooth® device to connect to.
Now connect your communication device
(mobile phone or computer) via Bluetooth®
with the headphones. Please refer to the
notes in the instructions for your communica-
tion device. Select the entry “SBKL 40 B2“
from the list of devices detected by your
computer or mobile.
Once the connection has been established,
the LED 7 will flash white for 5 seconds.
After that the LED 7 will turn OFF.
Please note, your communication device
must support Bluetooth® Standard 5.0 to
use all options.
You may need to approve the connection on
the communication device. Please refer to the
instructions for use of the communication
device on this topic!
The headphones may be manually switched
off by holding the On / Off button 13 for
4 seconds until the LEDs 6 and 7 go.
Bluetooth® indicator:
LED indicator
status Headphone state
Flashing white Pairing mode
Solid white
(5 seconds) and
then turn OFF
Paired
Connecting the headphones
to a second Bluetooth® device
The headphones may be connected to two
Bluetooth® communication devices at the same
time. If the headphones are already connected
to a device, follow the steps below to connect
to the second device:
Activate multipoint mode by pressing and
holding Bluetooth® button 8 for 2 seconds.
The first communication device (mobile phone
or computer) is disconnected.
Now connect to the second communication
device via Bluetooth® with the headphones.
Please refer to the notes in the instructions
for your communication device. Select the
entry “SBKL 40 B2“ from the list of devices
detected by your computer or mobile. The
second communication device is connected.
Select the entry “SBKL 40 B2” from the list
of devices detected by your first communi-
cation device / computer. Now, both com-
munication devices are connected to the
headphones simultaneously.
After connected the headphone with 2
Bluetooth® devices, you can playback
music via either one of device.
Connection via NFC
You can simply connect the headphones with
your mobile device by tapping 2 devices
together via NFC touchpoint 9.
Please follow below steps to complete the
Bluetooth
®
connection via NFC touchpoint
9
.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 331902 SBKL 40 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 331902 SBKL 40 B2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info