Manual Silvercrest IAN 326310 SMZE 500 A1 (page 22 of 90) (English, German, Dutch, French, Polish, Swedish)

751813

Zoom out

Zoom in

1/90

20 GB

6.1 Assembling the multi

chopper

CAUTION:

~Depending on the hardness and consist-

ency of the food, do not fill the contain-

er7 up to the MAX10 marking, as

this can cause the blade assembly6 to

become blocked. Pay attention here to

the guideline values for various foods in

section “Processing table”.

1. Place the container7 on the anti-slip

mat11.

2. Place the blade assembly6 on the

peg9 in the container7.

3. Fill the prepared food into the contain-

er7.

4. Place the working cover5 onto the con-

tainer7 in such a way that the blade

assembly6 protrudes a little through the

opening in the working cover5.

5. Figure A: place the motor unit4 onto

the working cover5. Rotate and jiggle

the motor unit4 back and forth a little

until it sits firmly on the blade assem-

bly6 and working cover5.

6. Insert the mains plug1 into a wall sock-

et corresponding to the technical data.

6.2 Chopping

WARNING! Risk of material damage!

~The multi chopper is designed for a

maximum operating time of 30 seconds

without interruption.

After this, the device must remain

switched off until it has cooled down to

room temperature.

•Figure B: for chopping, hold down the

button I2 or the button II3.

• To switch off, release the pressed button

I2 / II3.

• Work using short pulses (1 pulse: press

for approx. 1 second).

The number and

length of the pulses will depend on the

quantity and consistency of the food. See

the specifications given in section “

Pro-

cessing table”.

• Repeatedly check the result. If the food

is not being chopped evenly:

- Release the button I2 / II3.

- Pull out the mains plug1.

- Thoroughly shake the container7.

- If food is sticking to the inside wall of

the container, remove the motor unit4

and the working cover5. Push the

pieces downwards using a spatula.

- Put all the pieces back together be-

fore you reinsert the mains plug1 into

a wall socket and resume processing.

6.3 Remove food and

disassemble the multi

chopper

1. Disconnect the mains plug1 from the

wall socket and wait for the standstill of

the blade assembly6.

2. Remove the motor unit4 and the work-

ing cover5.

3. Remove the blade assembly6 carefully

from the container7.

4. Remove the food, e.g. using a spatula.

5. Clean the device as soon as possible af-

ter use.

__326310_Multizerkleinerer_B8.book Seite 20 Montag, 19. August 2019 12:26 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326310 SMZE 500 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 326310 SMZE 500 A1 Manual

Product: