751810

Silvercrest IAN 321579 SMA 500 D1 Manual

36
Zoom out
Zoom in
Previous page
1/148
Next page
SilverCrest SMA 500 D1
34 - English
• Use the On/Off button (9) to select operating mode 1. The white LED (14) flashes and
whisk B (5) begins to turn after approximately three seconds. The process of creating
milk froth begins.
or
• Use the On/Off button (9) to select operating mode 2. The white LED (8) flashes and
whisk B (5) begins to turn after approximately three seconds. The process of creating
milk froth begins.
or
• Use the On/Off button (9) to select operating mode 3. The white LED (13) flashes and
whisk B (5) begins to turn after approximately three seconds. The process of creating
milk froth begins.
• As soon as the milk is ready, the milk frother automatically switches off and the white LED (8,
13, 14) flashes; it then goes out again after a short time.
You can stop the preparation process at any time by briefly pressing the On/Off
button (9).
• Wait around 30 seconds until any remaining fluid milk settles at the bottom of the canister (7).
• Lift the canister (7) off the base (11), remove the lid (2) and use the milk froth as you wish.
• Wait two to three minutes before using the milk frother again.
7.7 Making cold milk froth
• Insert whisk B (5) up to the stop on the drive shaft inside the canister (7).
• Take the canister (7) off the base (11) and pour milk up to the MIN marking inside the canister
(7). The volume of the milk increases during the frothing process. Only pour milk up to the
lower MAX marking in order to prevent the milk froth from overflowing.
• Place the lid (2) onto the canister (7).
• Place the canister (7) onto the base (11).
• Use the On/Off button (9) to select operating mode 4. The white LED (10) flashes and whisk B
(5) begins to turn after approximately three seconds. The process of creating milk froth begins.
• As soon as the milk is ready, the milk frother automatically switches off and the white LED (10)
flashes; it then goes out again after a short time.
You can stop the preparation process at any time by briefly pressing the On/Off
button (9).
• Wait around 30 seconds until any remaining fluid milk settles at the bottom of the canister (7).
• Lift the canister (7) off the base (11), remove the lid (2) and use the milk froth as you wish.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 321579 SMA 500 D1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 321579 SMA 500 D1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info