752600
19
Zoom out
Zoom in
Previous page
1/74
Next page
17
GB
NOTE: We recommend the use without at-
tachments for the optimum activity of the
ions.
Styling attachment
The styling attachment|11 makes it possible
to direct the air flow onto specific sections of
hair.
1. Place the styling attachment|11 onto
the front of the hair dryer, so that it
locks into position.
2. The styling attachment|11 can be rotat-
ed into any position desired.
3. Do not remove the styling attachment|11
from the hair dryer until it has cooled
down.
Diffuser
Use the diffuser attachment|12 to create
curls and gentle waves in the lengths and
tips, as well as for body and volume at the
roots of the hair.
1. Figure A: Place the diffuser|12 onto
the hair dryer.
2. Switch on the hair dryer.
3. Use:
- For long hair: draw diffuser|12
through to the tips, and style the hair
into gentle waves in the direction of
the roots.
- For short hair: use the diffuser|12 to
work on the hair around the roots,
generating body and volume.
4. Do not remove the diffuser|12 from the
hair dryer until it has cooled down.
6. Cleaning
DANGER!
~Pull the mains plug|5 out of the wall
socket before you clean the hair dryer.
WARNING! Risk of material damage!
~Do not use any astringent or abrasive
cleaning agents.
Clean the device regularly. Particularly en-
sure that the air inlet and outlet are free of
dust, hair and fluff.
Wipe down the casing, the protective
grid|2 over the air inlet|3, and the styl-
ing attachment|11 using a damp cloth.
Remove the styling attachment|11 or
the diffuser|12 from the hair dryer. Hold
the hair dryer with the air outlet|10
pointing downwards. Clean the protec-
tive discs using a brush.
Cleaning the protective grid
1. Rotate the protective grid|2 a little bit
anti-clockwise and then remove it.
2. Hold the hair dryer with the air inlet
pointing downwards. Clean the inside
and the outside protective grid using a
brush.
3. Replace the protective grid|2.
Cleaning the attachments
1. Do not remove an attachment (11
or|12) from the hair dryer until it has
cooled down.
2. Wipe the attachment (11 or|12) with
a damp cloth.
3. Allow the attachment (11 or|12) to dry
completely before you use it again.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 317103 SHTR 2200 F3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 317103 SHTR 2200 F3 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info