752600
18
Zoom out
Zoom in
Previous page
1/74
Next page
16 GB
DANGER! Risk of injury
through burning
~Do not direct the flow of hot air into
eyes, onto hands, or onto any other
heat-sensitive body parts.
~Do not touch the hot surfaces of the de-
vice.
~Allow the device to cool down com-
pletely before you clean it or put it
away.
~Allow all attachments to cool down be-
fore removing it from the device.
WARNING! Risk of material damage
~Only use the original accessories.
~Never place the device on hot surfaces
(e.g. hob plates) or near heat sources or
open fire.
~Do not use any astringent or abrasive
cleaning agents.
~Do not expose the device to tempera-
tures below -10 °C or above +40 °C.
4. Items supplied
1 hair dryer
1 styling attachment|11
1 diffuser|12
1 set of operating instructions
5. Operation
NOTE: before using for the first time, switch
the device on for a few minutes and allow it
to run at the highest speed and temperature
settings. As a result of the manufacturing
process, you may notice a slight odour. This
is normal and only occurs during first use.
Ensure that the room is well ventilated.
Switching on/off and adjusting
speed
1. Connect the mains plug|5 with an easi-
ly accessible wall socket.
2. Using the on/off switch|7 and the
switch for the speed settings, you can
switch the device on and select the de-
sired speed for the air flow:
0=off
= slow; gentle air flow
= fast; strong air flow
3. After drying, switch the on/off switch|7
to 0 (off) and pull out the mains plug.
Selecting the temperature
Use the switch for the hot air settings|8 to se-
lect the desired temperature for the air flow:
= low temperature
= medium temperature
= high temperature
Cooling function
In order to improve the durability of your
hair style, you can cool the hair after it has
been styled with hot air using the but-
ton|9|.
Keep the button|9 held down during dry-
ing in order to get a cool air flow, irrespec-
tive of the starting temperature.
When you no longer require the cool air
flow, release the button|9 .
Ionisation function
You can use the ion switch|4 to additionally
activate the ionisation function, whatever
setting you are using. This then continuously
applies ions to the hair.
This reduces the static loading of the hair
and improves its stylability.
The hair becomes soft, smooth, glossy, and
easier to style.
Ion function on, LED|1 lights up
Ion function off, LED|1 off
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 317103 SHTR 2200 F3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 317103 SHTR 2200 F3 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info