752633

Silvercrest IAN 316750 KA 6045SCR Manual

18
Zoom out
Zoom in
Previous page
1/61
Next page
18 GB/IE
Note: consult the manufacturer‘s operating manual
before using the drill.
Before installation, familiarise yourself with all
the instructions and illustrations in this manual,
as well as with the product itself.
Note: if the heating unit 1 is to be mounted on
the wall, the rods 4 and base 10 are not required.
The locating screw 20 must also be removed (see
fig. G).
Note: mount the included wall bracket 14 on a
solid, straight wall.
Note: position the heating unit 1 at a height of
at least 180 cm.
Mark drill holes using the included stencil 18 .
You will find this on the last page of these in-
structions.
Now drill the fixing holes. Make sure that you
do not damage any water pipes during instal-
lation.
Insert the appropriate dowels (not included)
into the drilled holes.
Attach the wall bracket 14 complete with the
heating unit 1 to the wall using appropriate
screws (not included). Ensure that there is 50 cm
of free space around the heating unit 1.
Initial use
Connect the product to an earthed power socket.
Set up the heating unit 1 in a place at least
50 cm away from walls and flammable materi-
als (furniture, curtains etc.).
Pull on the cord switch 12 until the desired
heating mode appears in the display 2. The
following table lists the different heating settings:
Symbol
on dis-
play 2
Heating
mode Output
0 Off 0 Watt
1Low 650 Watt
2 Medium 1300 Watt
3 High 2000 Watt
To switch the product off, pull on the cord
switch 12 until the symbol 0 appears on the
display 2.
Attention! If you are using the product con-
nected to a power supply system with a low
current, such as for example at a campsite, only
use it in heating mode 1. To switch the device off,
positions 2 and 3 will still have to be selected
first, which can overload the power supply system.
Cleaning and care
Before cleaning, unplug the mains plug 11 and
wait until the device has cooled down.
Never use strong or abrasive cleaning agents,
scourers or steel wool. These would damage
the product.
Never clean the product with water and
never submerge it in water or other liquids.
Clean the product with a damp cloth.
Regularly remove dirt and insects from behind
the heater grille, using a vacuum cleaner.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 316750 KA 6045SCR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 316750 KA 6045SCR in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info