Manual Silvercrest IAN 315282 SKMD 1000 A1 (page 26 of 96) (English, German, Dutch, French, Polish, Swedish)

752609

Zoom out

Zoom in

1/96

24 GB

8. Cleaning

DANGER! Risk of electric

shock!

Pull out the mains plug|

from the wall sock-

et before cleaning the coffee machine|

~The coffee machine|6 and the power

cable with the mains plug|7 must not be

immersed in water or other liquids.

DANGER! Risk of injury

through scalding!

The coffee machine|

becomes very hot

during operation. Allow it to cool down

before cleaning.

WARNING! Risk of material damage!

~Do not use any astringent or abrasive

cleaning agents.

NOTE: in order to start the brewing process

with clear water or a descaling solution, the

filling of the water tank|4 must not exceed

the 8 cup marking. Otherwise, the ther-

mal jug|8 may overflow.

8.1 After every use

Clean the device after every use, if possible.

1. Disconnect the mains plug|7 from the

wall socket.

2. Open the lid|1.

3. Lift up the handle|12 of the filter hold-

er|11, remove the filter holder and dis-

pose of the used paper filter.

4. Rinse out the filter holder|11 with warm

water.

5. Rinse out or off the thermal jug|8 and its

lid|9 with clear water. Only in the case

of stubborn residues, you should use a

little mild detergent and a rinsing brush

which is not too hard. Then rinse all

parts thoroughly with clear water.

6. Wipe down the coffee machine|6 and

the power cable|7with a damp cloth

when required. Dry with a dry cloth.

7. Allow all parts to dry completely before you

put them away or use the device again.

NOTE: the thermal jug|8 can also be

cleaned on the outside with stainless steel

cleaners from specialist retailers.

8.2 Descaling

Time intervals for descaling

The intervals for descaling are dependent

on the hardness of the water, and how often

you use the device. Where the hardness of

the water is medium or high, we recommend

descaling monthly.

If using tap water, you can find out the hard-

ness of the water in the area where you live

by inquiring at your local waterworks.

After some time, the boiling process will re-

sult in limescale being deposited in parts of

the coffee machine (depending on the hard-

ness of the water used). You should remove

this at regular intervals, because otherwise

the power consumption of the device will in-

crease.

1. Turn off the coffee machine|6 and allow

it to cool down completely.

2. Place the descaling agent into the water

tank|4. Use a liquid, environmentally

friendly descaling agent based on citric

acid, and follow the instructions of the

manufacturer.

3. Fill the water tank|4 to the 8 cup

marking.

4. Close the lid|1 of the coffee machine|6.

5. It is very important to screw the

lid|9 on the thermal jug|8.

6. Place the thermal jug|8 in the coffee

machine|6.

7. Press |18. The red LED|19 lights up

and the brewing process will start after

a short time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 315282 SKMD 1000 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 315282 SKMD 1000 A1 Manual

Product: