751715

Silvercrest IAN 315097 SHBS 500 D3 Manual

24
Zoom out
Zoom in
Previous page
1/96
Next page
22 GB
• Place a sheet or cape around throat and
neck to prevent cut-off hair from drop-
ping into the collar.
• Comb the hair well.
•Figure A: first, start with a longer cut-
ting length and then, in the course of the
cutting process, use progressively short-
er cutting lengths. Adjust the cutting
length according to the desired hair
length. Press on the rear of the comb at-
tachment1 to adjust it, and read the
cutting lengths by using the marking11
on the side of the comb attachment1.
NOTE: ensure that the comb attachment1
is still firmly attached to the device after ad-
justment.
• Start by cutting the hair in the neck or on
the sides and cut towards the centre of
the head. Then, cut the front section of the
hair towards the centre of the head.
• Hold the device in such a way that the
comb attachment1 lies as flat as possi-
ble on the head. Move the device
through your hair smoothly and in only
one direction so as to avoid catching.
• If possible, cut against direction of hair
growth.
• In order to catch all the hair, move the
device several times through each sec-
tion of the hair.
• Comb the hair repeatedly and well.
• In order to achieve a straight cutting line
for cutting lengths over 20 mm, the de-
vice should be passed through the hair
several times from different directions.
6.3 Thinning hair
Use the thinning function to reduce the vol-
ume of the hair without changing its length.
• Push the slider3 upwards towards the
shaving head10. The thinning function
integrated into the shaving head10 is
extended upwards.
6.4 Cutting hairlines and
beard
WARNING! Risk of injury!
~The points of the shaving head10 are
sharp. Handle with care.
•Figure A: adjust the cutting length ac-
cording to the desired hair length. Press
on the rear of the comb attachment1 to
adjust it, and read the cutting lengths by
using the marking11 on the side of the
comb attachment1. Now, shorten your
beard step-by-step.
NOTE: ensure that the comb attachment1
is still firmly attached to the device after ad-
justment.
• Use the device only with the shaving
head10 and without comb attach-
ment1, to cut hair very short or to cut
beard and hairline. In this way you can
cut hair lengths of 1-2 mm evenly.
• It is only possible to adjust the cutting
length of the comb attachment1 when
the device is switched off.
• The cutting length setting of the comb
attachment1 is only locked when the
device is switched on.
• It is only possible to adjust the cutting
length of the comb attachment1 when
the device is switched off.
• The cutting length setting of the comb
attachment1 is only locked when the
device is switched on.
__315097_Haar und Bartschneider_B8.book Seite 22 Montag, 3. Juni 2019 1:40 13
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 315097 SHBS 500 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 315097 SHBS 500 D3 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info