752586

Silvercrest IAN 314657 SSB850 E1 Manual

25
Zoom out
Zoom in
Previous page
1/66
Next page
SilverCrest SBB 850 E1
English - 23
14. Troubleshooting / Frequently asked questions
Display indicates "H:HH"
Problem: A programme was started although the automatic bread maker had not cooled down
enough since the last baking process.
Solution: Stop the programme and switch off the main switch (5). Let the automatic bread maker
cool down with its cover (2) open for 20-30 minutes.
Programme does not start and display jumps to programme 1
Problem: The automatic bread maker has not cooled down enough since the last baking process.
Solution: Let the automatic bread maker cool down with its cover (2) open for 20-30 minutes.
Display indicates "E:E0" after programme starts
Solution: Switch off the main switch (5) and disconnect the mains plug. Then insert the mains plug
again and switch on the main switch (5). If the error message is still displayed, please contact
Customer Service.
The dough hook (7) is stuck in the baking tin (8) after baking
Solution: Fill the baking tin (8) with hot water and turn the dough hook (7) so that the deposits can
dissolve.
The dough hook (7) is stuck in the bread after baking
Solution: Remove the dough hook (7) with the dough hook remover (11).
The motor turns, but the dough is not mixed
Solution: Check whether the baking tin (8) and dough hooks (7) are locked into place correctly.
Automatic bread maker crushes fruit and nuts
Solution: Only add ingredients such as fruit and nuts to the dough when the beep sounds and
"ADD" is indicated on the display .
Automatic bread maker does not work
Solution: Make sure that the mains plug is connected to the power supply, the main switch (5) is
switched on and the power LED lights up. Use the programme sequence to try to determine the
current phase of the automatic bread maker. Some programme steps are hard to recognise from
the outside. Check whether the start/stop button was pressed correctly.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 314657 SSB850 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 314657 SSB850 E1 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 314657 SSB850 E1

Silvercrest IAN 314657 SSB850 E1 User Manual - German, Dutch, French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info