752631
21
Zoom out
Zoom in
Previous page
1/72
Next page
21 GB/IE
Adjusting the product
Adjusting the height
Loosen the height adjustment ring 12 by turning
it anticlockwise.
Move the internal pole 11 up or down and
adjust the desired height.
Once you have achieved the desired height,
secure the height adjustment ring 12 . Turn it
clockwise to do so.
Adjusting the angle
Gently tilt the motor 9 forward or backward
to achieve the desired angle.
Note: The tilt angle is 25 °.
Adjusting oscillation
Push the oscillation switch 8 down to make
the motor 9 turn.
Note: The motor 9 oscillates independently
in a range of 85 °.
Push the oscillation switch 8 up to stop the
motor 9 from rotating.
Operation
Operation via control panel
Press the ON / SPEED button 19 , to switch on
the product.
With the product switched on, repeatedly press
the ON/ SPEED button 19 , to choose between
the speed settings LOW (low), MID (medium)
und HIGH (fast).
Note: An illuminated LED on the operating
panel 17 indicates the selected speed.
Push the OFF button 20 to switch the product
off.
Operation via remote control
Push the ON- / SPEED button 23 to switch the
product on.
With the product switched on, repeatedly press
the ON / SPEED button 23 to switch between
speed levels.
When the product is switched on, repeatedly
press the MODE button 25 , to choose be-
tween three fan modes (automatic, natural,
sleep). An LED in the control panel indicates
the selected mode.
Red = Automatic (continuous operation at the
selected speed level)
Green = Natural (continuous operation with
changing speed levels)
Off = Sleep (continuous operation with
decreasing speed level)
With the product switched on, push the TIMER
button 24 to set a time after which the product
shuts off on its own. The selected time can be
increased by pushing the TIMER button 24
repeatedly. The set time is indicated by the
illuminated LEDs on the control panel 17 . The
shortest Timer is 0.5 hours, the longest 7.5 hours.
Note: The timer can be exclusively adjusted
via the remote control.
Cleaning and care
Clean the product with a damp cloth.
Never use strong or abrasive cleaning agents,
scourers or steel wool. This would damage the
product.
Never immerse the product in water or other
liquids.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 313120 VE 6035SCR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 313120 VE 6035SCR in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info