752631

Silvercrest IAN 313120 VE 6035SCR Manual

20
Zoom out
Zoom in
Previous page
1/72
Next page
20 GB/IE
Risk of damage of the product
Only use the specified type of
battery / rechargeable battery!
Insert batteries / rechargeable
batteries according to polarity
marks (+) and (-) on the battery /
rechargeable battery and the
product.
C
lean the contacts on the battery /
rechargeable battery and in the
battery compartment before in-
serting!
Remove exhausted batteries /
rechargeable batteries from the
product immediately.
Installation
Note: A cross-head screwdriver is required to
assemble the product.
Remove the product and the accessories from
the packaging.
Assemble the base parts 15 in the shape of a
cross.
Screw the pole 13 to the bases 15 using the
mounting plate. Use the four included cross-head
screws 16 for this purpose.
Remove the height adjustment ring 12 by rotat-
ing it anticlockwise.
Push the cap 14 over the pole 13 . Then, place
the height adjustment ring 12 back on the pole
13 .
Pull the internal pole 11 out of the external pole
13 . Secure the internal pole 11 , by tightening
the height adjustment ring 12 through clockwise
rotation.
Remove the fastening screw 10 by turning it
anticlockwise.
Push the motor 9 on the internal pole 11 and
attach it using the fastening screw 10 . Turn the
screw clockwise to tighten.
Place the rear grill 6 on the motor 9 as shown
in Fig. D. Please ensure that the handle on the
rear grill 6 is located at the top.
Attach the rear grill 6 using the rear grill lock-
nut 5. Turn the screw clockwise to tighten.
Push the blades 4 on the shaft 7. Ensure that
the smooth side of the shaft 7 is facing down.
Push the blade cover 3 on the shaft 7 and
screw it on anticlockwise to tighten it.
Hang the front grill 1 on the rear grill 6
using the hook 2. Connect both grills using
the included screw 18 and nut.
Afterwards, close the fastening clamps.
Before first use
Place the product on a flat and stable surface
and ensure that there is a minimum of 10 cm of
clear space around the product. This product is
not suitable for connection or use in a cupboard
or outdoors.
Connect the mains cable to the socket.
Note: Before connecting the product, ensure
that the main voltage specified on the product
matches the local line voltage (Voltage:
220–240 V ∼).
Inserting / changing the battery
Open the battery compartment on the back of
the remote control.
Insert the batteries or replace the old batteries
with new ones. Only use batteries of the speci-
fied type („Technical data“).
Note: When inserting the batteries, please
observe the correct polarity. This is indicated in
the battery compartment.
Close the battery compartment.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 313120 VE 6035SCR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 313120 VE 6035SCR in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info