752919
20
Zoom out
Zoom in
Previous page
1/63
Next page
18 GB/IE
NOTES:
Only use 1 scoop at a time to avoid overfilling
and spilling the sugar out.
Do not use the product for longer than 15 minutes
without stopping. The product could overheat and
be damaged. Switch off the product and allow it
to cool down for at least 15 minutes.
Set the on/off switch
13
to I.
After a short while sugar strands will start to form
around the inner edge of the bowl 3.
Guide the bamboo stick
6
in circles around
the sugar container 2. While doing so, turn the
bamboo stick
6
in your fingers.
As soon as the sugar strand adheres to the
bamboo stick
6
lift the stick above the bowl 3
area.
Hold the bamboo stick
6
horizontally right
above the bowl 3 while turning it in your fingers
continuously.
Slowly move the bamboo stick
6
around the
edge of the bowl 3 to keep collecting all the
sugar strands.
The sugar is used up when no more strands
appear.
If you want to prepare more candy floss, switch
the product off. Refill the sugar container 2.
After use
Switching off: Set the on/off switch
13
to O.
Wait until the product cools down.
Clean the product thoroughly.
NOTE: Clean the product after every use,
otherwise the sugar residues may cause defects
in operation.
Thermal cutoff
The product is equipped with a thermal cutoff sensor.
If the temperature gets too high and there is a risk of
damage the product switches off automatically. Once
that happens, take the following measures:
Disconnect the power plug
11
from the power
socket immediately.
Have the product checked by qualified personnel.
Troubleshooting
Problem Cause/Solution
Water entered the
base unit.
Disconnect the power plug
11
from the power socket.
Flip the base 1 over and leave it to drain.
Have the product checked by a qualified personnel.
Sugar entered the
base unit.
Disconnect the power plug
11
from the power socket.
Allow the product to cool down.
Remove the sugar container 2 from the drive shaft
8
.
Flip the bottom section over. Gently shake the product letting the sugar trickle out.
The sugar container
is not turning.
Check if the sugar container 2 is placed correctly (see "Assembly").
No sugar strands
are forming.
The sugar container 2 might be jammed. Clean the container thoroughly.
The product
suddenly stops
working.
The product was in operation for too long activating the thermal cutoff
(see "Thermal cutoff").
Disconnect the power plug
11
from the power socket. Have the product checked
by qualified personnel.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 311436 SZM 500 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 311436 SZM 500 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info