752919
19
Zoom out
Zoom in
Previous page
1/63
Next page
17 GB/IE
Do not pull the power plug out
of the electrical outlet by the
power cord and do not wrap the
power cord around the product.
Connect the power plug to an
easily reachable electrical outlet
so that in case of an emergency
the product can be unplugged
immediately.
Do not touch the moving parts.
Keep fingers, hair, clothing and
utensils away from all moving
parts.
Disconnect the power plug from
the power supply when the
product is not in use and before
cleaning.
Make sure that the location
planned for the usage of the
product is well ventilated.
Place the product on heat-resistant
surfaces only. Do not place on
carpets, bedding, towels etc.
Should unusual noise, smell,
smoke or other malfunctions arise
during use, switch the product
off and unplug it from the power
socket.
Before use
Unpacking
Remove the packaging. Check if all parts are
complete.
Clean the product before first use (see "Cleaning
and care"). Dry all parts thoroughly.
Assembly
Fig. Step
Place the base unit 1 on a stable flat ground.
Avoid rugged surfaces to let the suction
cups
12
secure the base unit 1 position.
APlace the bowl 3 onto the base unit 1.
BTurn the bowl 3 clockwise until it is secured
in place.
CPlace the splash guard 4 on the bowl 3.
D
Align the edges of the splash guard 4 and
the bowl 3. Secure both parts together with
the locking ring 5.
E
Place the sugar container 2 on the drive
shaft 8.
NOTE: The cross pin on the drive
shaft 8 must fit into the indentation on
the bottom pin of the sugar container 2.
Operation
Connect the power plug
11
to a suitable mains
socket.
Switching on: Set the on/off switch
13
to I.
Allow the product to run for about 5 minutes to
reach the operational temperature.
Switching off: Set the on/off switch
13
to O.
Wait until the sugar container 2 stops turning.
Place approximately 14g sugar (not included)
into the middle section of the sugar container 2
by using the measuring spoon
9
.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 311436 SZM 500 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 311436 SZM 500 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info