752894
18
Zoom out
Zoom in
Previous page
1/74
Next page
16 GB
4. Items supplied
1 hair straightening comb
1 user instructions
Before using for the first time
Remove all packing material.
Check that the device is undamaged.
5. Operation
DANGER! - Fire hazard!
~Never cover the device or place it on
soft objects (e.g. towels). As long as the
device is switched on and/or hot, al-
ways place it on a stable, flat, heat-re-
sistant surface.
DANGER! Risk of injury
through burning!
~Never touch the hot comb insert with
ceramic coating|1.
NOTE: Before using it for the first time,
switch the device on for a few minutes and
set it to the highest temperature (180 °C). As
a result of the manufacturing process, you
may notice a slight odour. This is normal and
only occurs during first use. Ensure that the
room is well ventilated.
5.1 Switching on/off and
adjusting temperature
1. Place the device on a heat-resistant sur-
face.
2. Connect the mains plug|1 to a properly
installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-
ily accessible after the device is
plugged in.
3. Press the on/off button |4 for ap-
prox. 2 seconds to switch the device
on. The display|2 shows 150.
4. Use the +/|3 buttons to set the desired
temperature between 100 °C and
180 °C in 10 °C steps. LED segments
moving clockwise in the display|2 will
indicate that the device is heating up.
NOTE: LED segments running anticlockwise
indicate that the device is cooling down.
Wait until the desired temperature appears
in the display before straightening your hair.
5. In order to avoid changing the tempera-
ture by accidentally pressing the
+/-|3 buttons, you can lock these but-
tons.
- Press one of the
+
/
-
|
3
buttons for ap-
prox. 2 seconds. The buttons are now
locked. The display|
2
shows .
- Press one of the +/-|3 buttons again
for approx. 2 seconds. The buttons
are now unlocked. The display|2
stops showing .
6. Press the on/off button |4 for ap-
prox. 2 seconds to switch the device
off.
7. Allow the device to cool down on the
heat-resistant surface.
Switching off automatically
If you do not press a button on the switched-
on device for 30 minutes, it will switch off
automatically. Before this happens, the tem-
perature display will flash in the display|2.
Press the on/off button |4 for approx.
2|seconds to switch the device back on.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 311299 SHGK 32 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 311299 SHGK 32 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info