753870

Silvercrest IAN 310996 SV 125 A1 Manual

27
Zoom out
Zoom in
Previous page
1/105
Next page
25
GB
positioned just before the rear reference
ridges|11 and the side reference ridg-
es|13.
4. Ensure again that there are no creases
in the film bag - especially in the area
above the welding wire|15.
5. Close the lid|10.
6. Use both hands to press firmly on the
edges of the lid|10. They must audibly
click into place.
7. Press the button |3. The LED lights
up. The film bag is first vacuum-packed
and then sealed.
The LED goes out when the process is
complete.
NOTE: if the LED|3 does not go out and the
noise of the vacuum pump does not stop, de-
spite the fact that no further air is being
sucked out of the film bag, cancel the pro-
cess. Check that the film bag is in the correct
position in the device, and check for leaks.
8. Simultaneously, press buttons|7 in order
to release the lock of the lid|10.
9. Open the lid|10 and remove the bag.
10.Check the welding seam. It should be a
smooth creaseless seam.
9. Cleaning and storage
DANGER! Risk of injury
through burning/scalding!
~Allow the device to cool down com-
pletely before you clean it or put it
away.
~The welding wire|15 becomes very hot
during operation. Do not touch the hot
welding wire|15.
DANGER! Risk of electric
shock!
~Prior to cleaning, disconnect the mains
plug|4 of the device.
DANGER! Risk of electric
shock due to moisture!
~The device and the power cable with
mains plug|4 must not be immersed in
water or other liquids.
WARNING! Risk of material dam-
age!
~Do not use any sharp or abrasive clean-
ing agents.
9.1 Cleaning
In order to ensure the proper function and
the full capacity of your device, clean it reg-
ularly.
• Wipe down the housing of the device
with a damp cloth.
• Prior to the next use, the device must be
completely dry.
Collector
1. Grasp the centre or both outer ridges
with your fingers and carefully lift the
collector for liquids|16 out upwards.
2. Drain the liquid.
3. Rinse the collector|16 under warm dish-
water or place it in the dishwasher.
Make sure it is dry before inserting it.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 310996 SV 125 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 310996 SV 125 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info