Manual Silvercrest IAN 307016 SHTT 2200 B1 (page 22 of 93) (English, German, Dutch, French, Polish, Swedish)

753969

Zoom out

Zoom in

1/93

20 GB

• Place a sheet or cape around throat and

neck to prevent cut-off hair from drop-

ping into the collar.

• Comb the hair well.

•Figure A: first, start with a longer cut-

ting length and then, in the course of the

cutting process, use progressively short-

er cutting lengths. Adjust the cutting

length according to the desired hair

length. Press on the rear of the comb at-

tachment|1 to adjust it, and read the

cutting lengths by using the marking|11

on the side of the comb attachment|1.

NOTE: ensure that the comb attachment|1

is still firmly attached to the device after ad-

justment.

• Start by cutting the hair in the neck or on

the sides and cut towards the centre of

the head. Then, cut the front section of the

hair towards the centre of the head.

• Hold the device in such a way that the

comb attachment|1 lies as flat as possi-

ble on the head. Move the device

through your hair smoothly and in only

one direction so as to avoid catching.

• If possible, cut against direction of hair

growth.

• In order to catch all the hair, move the

device several times through each sec-

tion of the hair.

• Comb the hair repeatedly and well.

• In order to achieve a straight cutting line

for cutting lengths over 20 mm, the de-

vice should be passed through the hair

several times from different directions.

6.3 Thinning hair

Use the thinning function to reduce the vol-

ume of the hair without changing its length.

• Push the slider|3 upwards towards the

shaving head|10. The thinning function

integrated into the shaving head|10 is

extended upwards.

6.4 Cutting hairlines and

beard

WARNING! Risk of injury!

~The points of the shaving head|10 are

sharp. Handle with care.

•Figure A: adjust the cutting length ac-

cording to the desired hair length. Press

on the rear of the comb attachment|1 to

adjust it, and read the cutting lengths by

using the marking|11 on the side of the

comb attachment|1. Now, shorten your

beard step-by-step.

NOTE: ensure that the comb attachment|1

is still firmly attached to the device after ad-

justment.

• Use the device only with the shaving

head|10 and without comb attach-

ment|1, to cut hair very short or to cut

beard and hairline. In this way you can

cut hair lengths of 1-2 mm evenly.

• It is only possible to adjust the cutting

length of the comb attachment|1 when

the device is switched off.

• The cutting length setting of the comb

attachment|1 is only locked when the

device is switched on.

• It is only possible to adjust the cutting

length of the comb attachment|1 when

the device is switched off.

• The cutting length setting of the comb

attachment|1 is only locked when the

device is switched on.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 307016 SHTT 2200 B1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 307016 SHTT 2200 B1 Manual

Product: