Manual Silvercrest IAN 307016 SHTT 2200 B1 (page 20 of 93) (English, German, Dutch, French, Polish, Swedish)

753969

Zoom out

Zoom in

1/93

18 GB

~Connect the cable to the device before

plugging the power unit into a wall

socket.

~Only connect the power unit to a prop-

erly installed, easily accessible wall

socket, the voltage of which corre-

sponds to the specifications on the rat-

ing plate. The wall socket must continue

to be easily accessible after the device

is plugged in.

~Ensure that the cable cannot be dam-

aged by sharp edges or hot surfaces.

~Ensure that the cable is not trapped or

crushed.

~When removing the power unit from the

wall socket, always pull the power unit

and never the cable.

Pull the power unit out of the wall socket …

… after every use,

… after each charging process,

… if there is a fault,

… before connecting the device to the

cable,

… before you clean the device, and

… during thunderstorms.

~To avoid any risk, do not make modifi-

cations to the device. Repairs must be

carried out by a specialist workshop or

the Service Centre.

DANGER from batteries

~Protect the battery against mechanical

damages. Fire hazard!

~Do not expose the device to direct sun-

shine or heat. The ambient temperature

should not be lower than -10 °C and

higher than +40 °C.

~The charge contacts on the device must

not be connected by metallic objects.

~The

battery

may only be charged with

the original accessory (power unit).

~Should the electrolyte solution leak out

of the

battery

, avoid contact with eyes,

mucous membranes and skin. Rinse im-

mediately with plenty of clean water

and consult a doctor. The electrolyte

solution can cause irritation.

WARNING! Risk of injury from

cutting

~The tips of the comb attachments and

shaving head are sharp. Handle with

care.

~Do not use the device if the attachment

shows damages.

~Switch off the device before pinning up

or changing the attachments and each

time before cleaning.

WARNING! Risk of injury

~Place the cable in such a way that no

one trips over it or steps on it.

~Do not use the device on open wounds,

cuts, sunburn or blisters.

WARNING! Risk of material

damage

~Only use the original accessories.

~Never place the device on hot surfaces

(e.g. hob plates) or near heat sources or

open fire.

~Do not cover the power unit to prevent

overheating.

~The blades of the shaving head may be

cleaned with water. Do not use any oth-

er liquids.

~Do not use any astringent or abrasive

cleaning agents.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 307016 SHTT 2200 B1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 307016 SHTT 2200 B1 Manual

Product: