755710

Silvercrest IAN 303826 SWD 100 F3 Manual

20
Zoom out
Zoom in
Previous page
1/70
Next page
20 GB/IE
Special features
This heated blanket features a
super soft, hygienic fabric. The
textiles used in this heated blanket
satisfy the high human ecological requirements of
Oeko-Tex Standard 100, as verified by the German
Hohenstein Research Institute.
Start-up
Note: When the heated blanket is used for the first
time, you may notice a smell of plastic; however, this
will disappear after a short time.
To use the heated blanket, first connect the con-
trol unit 1 with the heated blanket using the
plug-in connector 3 (see Fig. B).
Switching on / off /
Selecting the temperature
Switching on:
Set the control unit 1 to level 1, 2, 3, 4, 5 or 6
to switch on the heated blanket.
Note: The function display 2 will light up af-
ter switching the heated blanket on.
Switching off:
Set the control unit 1 to level 0 to switch the
heated blanket off.
Note: The function display 2 will go off.
Selecting the temperature:
Set the control unit to the highest temperature
setting (setting 6). This will cause the heating
blanket to warm up quickly.
When opera-
ting the heated blanket for several
hours, we recommend setting the
control unit 1 to the lowest setting to
prevent the body from overheating
and to prevent potential subsequent
skin burns or a heat stroke.
Temperature levels
Set the control unit 1 to the desired tempera-
ture (see Fig. A).
Level 0: off
Level 1: minimum heat
Level 2–5: customised heat
Level 6: maximum heat
Automatic switch-off
Note: The heated blanket switches itself off auto-
matically after approx. 180 minutes. The function
display 2 on the control unit 1 will then start
flashing.
To switch the heated blanket back on, first se-
lect level 0 and after approx. 5 sec. select the
desired temperature level.
If the heated blanket is no longer used
after the timer expires:
– switch off the heated blanket (level 0),
– unplug from the socket,
– disconnect the plug-in connector 3, thus the
control unit 1 from the heated blanket.
Cleaning and care
DANGER TO
LIFE BY ELECTRIC SHOCK! Before
cleaning the heated blanket, always
unplug the mains plug from the socket and dis-
connect the plug-in connector 3, thus the con-
trol unit 1 from the heated blanket (see Fig. B).
Otherwise there is a risk of electric shock.
Use a dry, lint-free cloth for control unit 1
cleaning and care.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY!
Never immerse the control unit 1
Special features / Start-up / Cleaning and care Cleaning and care / Storage / Disposal
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 303826 SWD 100 F3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 303826 SWD 100 F3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info