755710

Silvercrest IAN 303826 SWD 100 F3 Manual

19
Zoom out
Zoom in
Previous page
1/70
Next page
19 GB/IE
Important safety instructions
field strength: max. 5000 V / m,
magnetic field strength: max.
80 A / m, magnetic flux density:
max. 0.1 milli-Tesla. Therefore
please consult your physician
and the manufacturer of your
pacemaker before using this
heated blanket.
Do not pull, twist or kink the ca-
bles. The heated blanket may
otherwise be damaged.
Frequently check this heated blan-
ket for signs of wear or damage.
If signs thereof are detected, the
heated blanket was used improp-
erly or will no longer heat up, it
must first be inspected by the man-
ufacturer before being switched
on again.
If the mains lead to the heated
blanket is damaged it must be
replaced by the manufacturer, its
customer service centre, or a
similarly qualified person to pre-
vent hazards.
With the heated blanket switched
on, never
– place objects on it (e.g. suit-
cases or clothes baskets),
– place a heating source such
as a hot-water bottle, heating
pad or similar items on it. The
heated blanket may otherwise
be damaged.
The electronic components inside
the control unit will heat up whilst
operating the heated blanket.
For this reason, never cover the
control unit or place it on the
heated blanket during operation.
This poses a risk of injuries and /
or damage to the heated blanket.
Always observe the information
on start-up, cleaning and care,
and storage.
If you have additional questions
on using our products, please
contact our Customer Service
Department.
Safety system
Note: The heated blanket features a safety system.
The electronic sensor technology prevents the heated
blanket from overheating across the entire surface
by automatically switching off in the event of a mal-
function.
If the safety system switches the heated blanket off
automatically as a result of a malfunction, the func
tion
display 2 on the control unit 1 will no longer light
up, even when the heated blanket is switched on.
Please note that, for safety reasons, the heated
blanket must not be used after a fault and must
be returned to the service address indicated.
Under no circumstances should you connect
the defective heated blanket to another switch
of the same type. This would also result in a
permanent shutdown by the safety system in
the switch.
Important safety instructions / Safety system
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 303826 SWD 100 F3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 303826 SWD 100 F3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info