694762
18
Zoom out
Zoom in
Previous page
1/64
Next page
19 GB/IE
Note: If the product is overloaded, the LCD read-
out
4
indicates “Err” and it will switch off within
3 seconds. Remove food from the product then
press the ON/OFF button
2
to switch on the
product again.
Q
Weigh and add
The product allows you to weigh foods consecu-
tively without removing food already in the weigh-
ing bowl
1
.
Place the weighing bowl
1
on the product.
Press the ON / OFF button
2
to switch the
product on.
Select the unit of weight by pressing the unit of
weight button
5
. You can choose between
“g / kg“ and “oz / lb“.
Place the food you wish to weigh in the weigh-
ing bowl
1
.
The LCD readout
4
indicates the weight of the
food in the selected unit of weight.
Now press the Zero button
6
. The product
now reads “TARE“.
Now place more food in the weighing bowl
1
.
The LCD readout
4
indicates the weight of the
food you have added in the selected unit of weight.
Continue in this way only until the maximum
capacity of the product is reached or the
weighing bowl
1
is full.
Q
Remove part of the
weighed food
Place the weighing bowl
1
on the product.
Press the ON / OFF button
2
to switch the
product on.
Select the unit of weight by pressing the
unit of
weight button
5
. You can choose between
g / kg“ and
oz / lb“.
Place the food you wish to weigh in the
weighing bowl
1
.
The LCD readout
4
indicates the weight of the
food in the selected unit of weight.
Now press the Zero button
6
.
Now remove the required amount of food from
the weighing bowl
1
.
The LCD readout
4
indicates the weight of the
food you have removed as a negative number.
Now press the Zero button
6
. The product
now reads 0 g / 0.0 oz and “TARE” for further
removal / adding food.
Q
Set the countdown timer / alarm
The timer on the product has a time span of 00:10
to 99:50 minutes. The set time is counted down in
reverse to “00:00“. An alarm signal then sounds
and the alarm display “
15
flashes.
Press the ON / OFF button
2
to switch the
product on.
Press the Timer button
3
.
Set the required time by pressing the Timer button
5
, or the Timer button “
6
.
Press the Timer button
3
again to confirm the
set time and to start the countdown timer.
Press the Timer button
3
again to stop the
countdown timer.
Press the Timer button
3
again to reset the set
time to “00:00“.
NOTE: When the set time has elapsed, an ala
rm
signal sounds.
Press the ON / OFF button
2
to stop the alarm an
d
at the same time switch off the product.
Q
Display ambient temperature
When the product is switched on, the LCD readout
4
shows the current ambient temperature. This is
indicated by the temperature display
12
in °C.
Q
Switch off the product
The product switches itself off automatically after
90 seconds of inactivity to save energy.
Press the ON / OFF button
2
to switch the
product off manually.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest HG01696 - IAN 292102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest HG01696 - IAN 292102 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info