469810
31
Zoom out
Zoom in
Previous page
1/49
Next page
29
Cocoon M1450 TWIN Additional handsets and base units
ENGLISH
8.1 Registering an additional handset
Info
This is only required if you have deregistered a handset or have
bought a new handset.
Important
It is not possible to make or receive calls while the base unit is in
registration mode.
1. The base unit has to be restarted. Unplug the base unit power supply unit and plug it
back in again. The Charge/In use indicator
15
starts flashing rapidly.
Registration mode on the base unit is now activated for approximately 3 minutes. You
must work through the following steps to register a handset:
2. Press
2
.
3. Press
3
or
11
repeatedly, select ‘Handset’.
4. Press
2
to confirm.
5. Press
3
or
11
repeatedly, select ‘Registration’.
6. Press
2
to confirm.
7. Select ‘R
egister’ and press
2
.
8. Select the base unit (1-4) desired using
3
or
11
and press
2
.
9. Enter the base unit PIN (System PIN; default: 0000) and press
2
.
•“Re
start Base” appears in the display.
The handset will now search for the base unit and register when it has found it. The
display shows standby mode after a successful registration and the handset name and
handset number appear.
Info
You can register each handset to up to 4 different DECT base units.
The base units are numbered 1 to 4 within a handset. When you
register a new handset you will be able to assign it to a base unit.
8.2 Deregistering a handset
It is possible to deregister a handset from a base unit. For example, you should do this if a
handset is damaged and has to be replaced by a new one.
Important
You can only deregister another handset, i.e. you cannot deregister
the handset you are using for deregistration.
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Handset’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Registration’.
5. Press
2
to confirm.
6. Select ‘De-register’ and press
2
.
7. Enter the System PIN (base unit PIN) and press
2
.
8. Select the handset you wish to deregister using the number keys (1-5).
9. Press
2
to deregister.
8.3 Selecting a base unit
If your handset is registered to several base units (maximum of 4), you must select one of
these base units because the handset only communicates with one base unit at a time.
There are two options:
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest COCOON M1450 TWIN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest COCOON M1450 TWIN in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest COCOON M1450 TWIN

Silvercrest COCOON M1450 TWIN User Manual - German - 56 pages

Silvercrest COCOON M1450 TWIN User Manual - Dutch - 49 pages

Silvercrest COCOON M1450 TWIN User Manual - French - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info