469810

Silvercrest COCOON M1450 TWIN Manual

30
Zoom out
Zoom in
Previous page
1/49
Next page
28
Additional handsets and base units Cocoon M1450 TWIN
private exchange. The Recall key R
4
causes a brief interruption on the line. You can set
this interruption to 100 ms or 300 ms
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Base Settings’.
3. Press
2
to confirm.
•Press
3
or
11
repeatedly, select ‘Recall’.
4. Press
2
to confirm.
5. Press
3
or
11
repeatedly to select the desired flash time:
–‘Lo
ng’ = 300 ms
–‘Short’ = 100 ms
6. Press ‘Save’
2
to confirm or press
14
to quit the menu.
7.3 Changing the PIN (system PIN)
Some functions are only available if you know the PIN for the base unit.
The PIN has four digits. The default setting for the PIN is ‘0000’. The procedure for changing
the de
fault PIN or to enter a new PIN is as follows:
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Base Settings’.
3. Press
2
to confirm.
•Press
3
or
11
repeatedly select ‘System PIN’.
4. Press
2
and enter the old PIN.
5. Press
2
. ‘Incorrect PIN’ will appear in the display if the wrong PIN is entered.
Once you have entered the correct PIN, you
are prompted to enter a new PIN. Enter the
new System PIN and press
2
.
6. Enter the new PIN again and press
2
to confirm.
7.4 Setting the dialling mode
There are two different dialling modes that may be used in telephones.
• Multifrequency dialling (DTMF) or tone dialling (current, modern dialling method)
• Pulse dialling (for older equipment).
Modern equipment is equipped with both functions, these can be changed depending on the
ap
plication. Tone dialling is needed for programming or operating functions, for instance, if
you are using the telephone on a private exchange. Where pulse dialling is used,
malfunctions can occur even in normal operation on private exchanges as the system
interprets the pulse dialling signals incorrectly.
Changing the dialling method:
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Base Settings’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Dial Mode’.
5. Press
2
to confirm.
6. Select the dial mode required using
3
or
11
and press ‘Save’
2
to confirm.
8 Additional handsets and base units
Up to 5 handsets can be registered to one base unit. Each handset can, for its part, be
registered to up to four base units and the user can choose which base unit he wishes to use.
In the default setting as supplied, each handset is registered as Handset 1 to Base unit 1.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest COCOON M1450 TWIN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest COCOON M1450 TWIN in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest COCOON M1450 TWIN

Silvercrest COCOON M1450 TWIN User Manual - German - 56 pages

Silvercrest COCOON M1450 TWIN User Manual - Dutch - 49 pages

Silvercrest COCOON M1450 TWIN User Manual - French - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info