664892
37
Zoom out
Zoom in
Previous page
1/62
Next page
How to sew buttonholes (one-step buttonhole)
GB
32
Buttonhole sewing is a simple process that provides reliable results.
However, it is strongly suggested to always make a practice buttonhole on a
sample of your fabric and interfacing.
1. Using tailor's chalk, mark the position of the buttonhole on the fabric.
2. Attach the buttonhole foot and set the pattern selector dial to " ". Set
stitch length dial to " ". Adjust stitch width to desired width.
3. Lower the presser foot aligning the marks on foot with the marks on the
fabric (A). (The front bar tack will be sewn first.)
4. Open the button plate and insert the button (B).
5. Lower the buttonhole lever and gently push it back (C).
6. While lightly holding the upper thread, start the machine.
7. Buttonhole stitching is done in the order (D).
8. Stop the machine when the buttonhole is sewn.
When sewing buttonholes on stretch fabric, hook heavy thread or cord under
the buttonhole foot. When the buttonhole is sewn the legs will overcast the
cord.
1. Mark the position of the buttonhole on the fabric with the tailor's chalk,
attach the buttonhole foot, and set the pattern selector dial to " ". Set
stitch length dial to " ".
2. Hook the heavy thread onto the back end of the buttonhole foot, then
bring the two heavy thread ends to the front of the foot, insert them into
the grooves and temporarily tie them there.
3. Lower the presser foot and start sewing.
* Set the stitch width to match the diameter of the gimp thread.
4. Once sewing is completed, gently pull the heavy thread to remove any
slack, then trim off the excess.
Making a Buttonhole
Making a Buttonhole on Stretch Fabrics (E)
0
1
2
3
4
S
0.5~1
3~5
05123 4
D E
2
1
4
3
B
C
PUSH
P
U
S
H
A
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 2003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 2003 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info