664892
35
Zoom out
Zoom in
Previous page
1/62
Next page
a
bb
a
b
GB
30
Move the drop feed control to right side to lower the feed dogs. (1)
Change presser foot to button sewing foot.
Position the work under the foot. Place the button on the marked position
and lower the foot. Set the pattern selector knob on " " and sew a few
securing stitches. Select the zig-zag stitch width according to the distance
between the two holes of the button. Turn the handwheel to check if the
needle goes into the right and the left hole of the button without any
obstruction (adjust the stitch width according to the button). Slowly sew on
the button with about 10 stitches. Select pattern " " and sew a few securing
stitches.
If a shank is required, place a darning needle on top of the button and sew.
(3) For buttons with 4 holes, sew through the front two holes first (2), push
work forward and then sew through the back two holes as described. (3)
Sewing on buttons (for model- 2 dials)
0
1
2
3
4
0
E
Deslice el control del transportador de dientes hacia el lado derecho para
bajar los dientes. (1)
Quite el pié presnsatela y coloque el especial para pegar botones.
Coloque la tela debajo del pié prénsatela, el dial en la posición deseada y
baje el pié prénsatela. Ponga el selector de dibujo en " " y cosa unas pocas
puntadas de fijación. Seleccione uno de los dos diseños del zigzag, de
acuerdo con la distancia entre los agujeros del botón.
Gire el volante para verificar si la aguja entre en el agujero derecho e
izquierdo sin tocar el botón.
Cosa lentamente con unas 10 puntadas. Ponga el selector de dibujo en " "
y coser unas pocas puntadas mas de fijación (2).
Si desea pegar el botón con tallo, utilizar una aguja de zurcir en la parte
superior del botón y coser (3). Para botones con cuatro agujeros, coser
primero a través de los dos agujeros frontales (2), empujar la tela hacia
delante y coser luego a través de los dos agujeros posteriores (3).
2
3
1
Como pegar botones (en modelo de 2 diales)
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 2003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 2003 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info