685066

Silkn Flash and Go Jewel Manual

16
Zoom out
Zoom in
Previous page
1/68
Next page
16
ENEN
I
Be sure to cover up moles, warts or other marks on the skin that
should not be treated.
2. Press the control button. The device will turn on, the level 1 energy
indicator light will be on, and a fan sound will start.
3. Approximately 1 second after pressing the control button, the ready light
will turn on (#4 in the diagram). The device is then ready to use at the
lowest energy level.
4. Set the energy level. Press the control button repeatedly to increase
the energy level until you have the level you want. The energy level
indicator lights indicate the energy level setting (refer to section "8.2
Energy Levels").
5. Decide if you wish to treat the area by Gliding or Pulsing.
6. Apply the treatment surface to the skin (#6 in the diagram). Make sure
that the skin is spread evenly and smoothly. When the treatment surface
is in full contact with the skin, the ready light will start blinking slowly.
7. The device will rst determine the color of your skin automatically and it
will ash a pulse of light onto your skin. You will feel a mild sensation of
warmth and tingling, and you may hear a popping sound.
I
If the skin is very dark, the device will set itself to energy level 1
automatically. There will be a short delay before the pulse.
I
If you are pulsing, remove the device from your skin. If you are
gliding, simply continue.
The device will immediately recharge for the next pulse. After a few
seconds (depending on the energy level) the ready light will turn
on again, and start blinking slowly when pressed against the skin.
8. If you are pulsing, repeat the process. If you are gliding, simply continue.
9. Continue to pulse or glide until you have treated the area fully.
JJ
Stop use immediately, if your skin blisters or burns.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silkn Flash and Go Jewel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silkn Flash and Go Jewel in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info