685067
9
Zoom out
Zoom in
Previous page
1/29
Next page
1716
English
English
12. Troubleshooting
12.1. “My Flash&Go™ does not start.
Make sure the power cord is properly connected to the Flash&Go™ device.
Make sure the power cord is plugged into an electrical outlet on the wall.
12.2. A light pulse is not emitted when I press the PULSE TRIGGER”
Make sure the Ready Indicator is blinking.
Make sure you have good contact with the skin and that the treatment surface is evenly and firmly pressed to
the skin. For your safety, the Pulse trigger will activate a pulse only if the treatment surface is firmly pressed
against the skin.
Check the Indicator Light. If it blinks slowly, the Skin Color sensor has stopped the light pulse; the skin color
window was not properly covered by the skin or your skin may be too dark for you to use Flash&Go™. Try
to apply Flash&Go™ again on a dierent part of your body.
If the Ready light is o, together with any number of blinking Energy Level light indicators, you have a system
error. If this problem persists, contact your local Flash&Go™ Customer Service Center.
If these problems persist, contact your local Flash&Go™ Customer Service Center.
Check if the System Warning Indicator Light is on, and all other lights are blinking. If so, unplug the
device from its power source. The device has reached its End of Life stage. Please refer to section 11 –
“Flash&Go™ Maintenance” for further instructions on how to safely dispose of the device.
Do not attempt to open or repair your Flash&Go™ device. Only authorized
Flash&Go™ repair centers are permitted to perform repairs.
Opening Flash&Go™ may expose you to dangerous electrical components and to pulsed light energy, either of
which may cause bodily damage and/or eye injury.
Trying to open Flash&Go™ may also damage the device and will void your warranty.
Please contact Flash&Go™ Customer Service if you have a broken or damaged device in need of repair.
13. Customer Service
For more information about Silk’n™ products please enter your local Silk’n™ website, www.silkn.com.
If your device is broken, damaged, in need of repair, or for any other user assistance, please contact your
local Silk’n™ Customer Service:
For USA and Canada customers: 1-877-DO-SILKN / 1-877-367-4556, contact@silkn.com
14. Specifications
Spot size 0.9cm x 3cm [2.7cm²]
Technology New Home Pulsed Light™
Pulse Duration 500 – 800 μsec
Wavelength
475-1200nm
Power Output 3-5 J/cm
2
Charging time / Power source Continuous operation
Time needed to treat lower legs 30 minutes
Operation and Safety Skin Color Sensor seamlessly ensures use only on appropriate skin types.
Classified standard
IEC 60601-2-57:2011
Risk Group Exempt
Package size Height 9 inch, Width 9 inch, Depth 5.2 inch180x180x100mm
System weight 200 gr.
Temperature
Operating 10°C to 35°C
Storage -40 to +70°C
Humidity
Operating 30 to 75% RH
Storage 10 to 90% RH
Atmospheric pressure
Operating 700 to 1060hPa
Storage 500 to 1060hPa
Adaptor
Rated
Model: KSA24A1200150HU KSAPV0361200300DS
100-240V ; 50-60Hz 0.5A 100-240V ; 50-60Hz 0.9A
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silkn Flash and Go Compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silkn Flash and Go Compact in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info