Silk’n™ pulses should be administered in rows, starting at one end of each row and progressing sequentially towards
the other end. This technique allows better control of skin coverage, and helps you avoid treating the same area more
than once or overlapping skin areas.
When applied to the skin, the Silk’n™ ApplicAtor tip is designed to create temporary pressure marks on the
treated area. These visible marks can be used for proper positioning of the next pulse.
Try to avoid overlapping pulses!
Do not treat the same area of skin more than once per hair removal session!
If your skin blisters or burns, STOP USE IMMEDIATELY!
4.5. What to Expect when treating with Silk’n™?
For many people, using Silk’n™ may be their first experience with a light-based device designed for home use. Silk’n™ is simple to use, and hair removal
sessions go by quickly. During a Silk’n™ session it is normal to experience and feel:
A Fan Noise – The cooling fan in Silk’n™ makes noise similar to a hairdryer. This is normal.
A Pop Sound with Each Pulse – When a pulse of HPL™ light is activated, it is normal to hear a subtle pop sound simultaneously with the flash of light.
Moderate Pressure of the ApplicAtor – This is necessary and helpful for placement of adjacent pulses of light, and is part of the unique safety
feature of Silk’n™.
A Sensation of Warmth and Tingling – During each pulse of light it is normal to feel a mild sensation of warmth and tingling from the light energy.
Remember it is important to always use low energy settings for initial hair removal sessions. You may feel some warmth for up to an hour after
your Silk’n™ session.
Some Mild Red or Pink Color – During and just after your Silk’n™ session it is not uncommon to see some very mild, pink-like color of the skin. This
is usually most noticeable around the hairs themselves. However if you see full redness of the skin, blistering or burns stop use of Silk’n™ immediately.
4.6. After treating with Silk’n™
When Silk’n™ session has been completed turn Silk’n™ off by pressing the power on/off switch. (Be sure to remember the last energy level setting
you used, as it will not be restored when turning Silk’n™ on again.)
Unplug the power cord from the electrical outlet.
After each hair removal session it is recommended that you clean your Silk’n™ device, especially the ApplicAtor tip (See section 5.1: “Cleaning Silk’n™”).
After cleaning, it is recommended to store your Silk’n™ device in its original box, and keep it away from water.
Skin care following hair removal session
Do not expose treated areas of skin to the sun. Be sure to carefully protect the treated skin with sunscreen, throughout
the hair removal period and for at least 2 weeks following the last Silk’n™ session.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Silkn AS101496A at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Silkn AS101496A in the language / languages: English as an attachment in your email.
The manual is 0,79 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
