744789
28
Zoom out
Zoom in
Previous page
1/188
Next page
28
1 TIME
(Default)
Test flash
Executes a single test flash.
MODELING
Modeling flash
When the TEST button is kept pressed,
continuous flashing of approximately 1.5
seconds is conducted so the subject’s
shadows can be checked.
CUSTOM MODE (MENU 3)
It is possible to store and recall
custom settings. (Two series of
custom settings can be stored.)
STORING AND RECALLING
CUSTOM SETTINGS
1. Set the Flash mode, Mode details area, and Setup menu
contents as desired.
2. From [MENU 3] [CUSTOM MODE SETTING], select [C1]
or [C2] and press the button.
3. Select [OK] and confirm with the
button.
The registered contents are added to the Flash mode as the
Custom mode. (The Custom mode is indicated with the
or mark in the Flash mode area.)
DELETING THE REGISTERED CUSTOM MODE
1. From [MENU 3] [CUSTOM MODE DELETE], select [C1]
or [C2] and press the button.
2. Select [OK] and confirm with the button.
AF ASSIST LIGHT (MENU 4)
The AF assist light will turn on automatically as you focus on a
subject in a dark area. The effective range of the AF assist light
is from about 0.7 to 10 meters (2.3-29.5 feet).
When the AF assist light is not necessary, set [MENU 4]
[AF ASSIST LIGHT] [OFF].
LCD PANEL LIGHT (MENU 4)
When the power supply is turned to ON, the LCD panel lights
up. The ON/OFF settings of the light can be changed.
[MENU 4] [LCD LIGHT]
AUTO
(Default)
After 8 seconds of non-operation, the light will
turn off. When a button or dial is used while the
light is off, the light will automatically turn on.
8 SEC
Regardless of whether a button or dial is being
pressed, the light will turn off after 8 seconds
from when the light initially turned on.
ON The light is kept ON continuously.
Regardless of the setting, the light can be turned on/off with
the button.
LCD PANEL ADJUSTMENT (MENU 4)
The contrast and brightness of the LCD panel can be adjusted.
[MENU 4] [DISPLAY SETTING]
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sigma EF-630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sigma EF-630 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info