744789

Sigma EF-630 Manual

24
Zoom out
Zoom in
Previous page
1/188
Next page
24
WIRELESS FLASH
When the flash is used at a location far from the camera, the
creative possibilities are expanded. The EF-630 is controlled
remotely by the camera’s built-in flash or a separate Master
flash unit.
WIRELESS TTL FLASH
In wireless TTL mode, the camera is controlled so the camera
is automatically set to the appropriate exposure.
WHEN
USING
A
CAMERA
WITHOUT
AN
INTEGRATED
FLASH
(sd Quattro, etc.)
Two EF-630s (FOR SIGMA) are necessary. The flash attached
to the camera is called [Master unit], and the flash used at a
distance from the camera is called [Slave unit].
MASTER UNIT SETTINGS
1. Set the Flash mode to [WL TTL].
2. Set the channel if necessary.
(Select Ch.1 to Ch.3 in the Mode
details area.)
SLAVE UNIT SETTINGS
3. Set the Flash mode to [
WL
SLAVE
].
4. In the Mode details area, set the
same channel as that of the
Master unit.
5. Set the flash for firing. Check the
completion of charging and start shooting. (Completion of
charging is notified by the blinking of the AF assist light.)
Please set the flash unit between 0.5m~ 5m (1.6~ 16ft) from
the subject, and set the camera body between 1m~ 5m (1.6~
16ft) from the subject.
The Master unit fires in order to control the Slave unit and
does not influence photograph.
When setting a Slave unit at the desired position, you can
use mini-stand. This mini-stand has a screw hole for a tripod.
The EF-630 can also be used in combination with the
EF-610 DG SUPER SA-STTL. In this case, use the EF-610
DG SUPER as the Master unit. (For setting this as the
Master unit, please follow the EF-610 DG SUPER SA-STTL
instruction manual.)
WHEN USING A CAMERA WITH AN INTEGRATED FLASH
(SD1
/
SD1
Merrill, etc.)
1. Set the camera’s flash setting to the wireless flash mode and
set the channels if necessary. (For details of how to change
these settings, follow the camera’s instruction manual.)
2. Set
the
Flash
mode
to
[WL
SLAVE]
.
3. In the Mode details setting area,
set the same channel as that of
the camera.
4. Position the flash for firing. Ensure
both flashes are charged and
ready
for
firing,
then
start
shooting.
The camera’s built-in flash fires in order to control the Slave
unit and does not influence the photograph.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sigma EF-630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sigma EF-630 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info