744789

Sigma EF-630 Manual

23
Zoom out
Zoom in
Previous page
1/188
Next page
23
are blinking, the exposure may be mismatched. In that case,
change the conditions before you start shooting.
FLASH EXPOSURE COMPENSATION
Compensating only the light amount
of the flash is possible without
affecting exposure of the background.
Flash mode: Can be used with [
TTL
].
Set the compensation amount in
the Mode details area of the Flash
mode [TTL]. (The compensation amount has 1/3 steps and up
to ±3 steps can be set.)
When the light compensation is set at both the camera and
the flash, the operation varies depending on the camera.
sd Quattro series Other compatible cameras
The combined amount is used
for shooting The setting at the camera side
is prioritized.
MANUAL FLASH
Discretional setting of the flash amount is possible.
1. Set
the
Flash
mode
to
[MANUAL].
2. Set the flash amount in the Mode
details area. (Available range for
setting: 1/128 to 1/1, Available
pitch for setting: 1/3EV.)
3. Check the flashgun status with
the Ready light and start shooting.
In the distance display section in the Status area, the distance
that appropriate exposure can be obtained is calculated and
displayed. Even with the same flashing amount, the distance to
obtain the appropriate exposure varies if the camera’s ISO
sensitivity or the aperture value is changed.
An appropriate exposure when using manual flash can be
calculated using the following formula.
Guide
Number
(GN)
/
Shooting
distance
(m)
=
Aperture
value
(F)
For the GN (Guide Number) of this flash, refer to [Table 2]
attached at the end of this manual.
MULTI FLASH
Displaying movement of the subject in one frame as if the
image is a photographic playback is possible by continuously
emitting light with the flash while the shutter is open.
Use the camera’s manual (“M”) exposure mode.
1. Set the Flash mode to [MULTI].
2. In the Mode details area, set the
flash amount, flash interval in
"
Hz
"
(eg.: 10 Hz = Emits light with the
frequency of 10 times per second),
and the number of flashes in "
x
".
3. Set a shutter speed that is slower than the value of the
“number of flashes" / "flash frequency."
4.
Check the flashgun status with the Ready light and start shooting.
The number of flashes that can be fired continuously varies
depending on the combination of the flash amount and the
flash frequency. Refer to [Table 3] at the end of this manual.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sigma EF-630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sigma EF-630 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info