75475
20
Zoom out
Zoom in
Previous page
1/48
Next page
20
en
Rust stains should be cleaned using chlorine-free detergents
(look at the list of substances contained in the product on the
packaging.) Never use
wire wool.
It is recommended that the condition of the hose be checked
every 5 years to prevent the risk of damage caused by leaks or
flooding.
Cleaning is necessary:
m If the pump is blocked by foreign material (for example
buttons, fasteners, clips, etc.) or if used water is not drained.
m After washing fluffy items.
All water must be removed from inside the appliance before
cleaning the pump. As much as 20 litres / 4.4 gal of water may
remain if the pump is obstructed.
Procedure
1. Remove the base board from the front of the washing
machine, turning the plastic screw heads using a coin.
! Risk of burning. Allow the used water to cool down
2. Place a shallow container under the drainage pump cover
(outlet filter). Loosen the cover without removing it completely
to allow the water to empty gradually. Close the drainage
pump cover when the container is full. Repeat the operation
until all the water has been emptied. Use a suitable container
to remove any remaining water which may spill on the floor.
3. Loosen the drainage pump cover completely.
4. Remove any foreign material or fluff which may have
collected there. Wipe the inside of the pump. The blades
must move freely.
5. Loosen and fit the drainage pump cover in place. Ensure that
it is correctly closed.
6. Fit the base board in place.
7. Pour 2 litres / 3.5 pt of water into the detergent drawer and
start the «Pumping (emptied)
b» additional programme.
This will prevent the detergent from being flushed out before
being used in the next wash.
Cleaning the drum
Water inlet hose
Cleaning the water
pump
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WXB 1060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WXB 1060 in the language / languages: English, French as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info