626180
34
Zoom out
Zoom in
Previous page
1/44
Next page
en Faults and what to do about them.
34
Faults and what to do about them.
Faults Cause/Remedy
Water is leaking out. Attach the drain hose correctly or replace it.
Tighten the screw connection of the drain hose.
The machine is not filling with
water.
Detergent is not being dispensed.
Have you pressed the Ü button?
Is the tap turned on?
Could the filter be clogged? Clean the filter.~ Page 31
Is the supply hose kinked or trapped?
The dispenser is empty and fill level
indicator is not flashing.
Is the drawer cover/connector dirty? Clean the detergent
drawer. ~ Page 29
Has the detergent drawer been pushed in correctly?
~ Page 24
The wrong detergent/fabric sof-
tener has been poured into the dis-
penser(s).
Dispenser(s):
4. Empty and clean. ~ Page 29
5. Refill. ~ Page 24
Detergent/fabric softener has con-
gealed in the dispensers.
Clean and refill the dispensers.
The door cannot be opened. The safety function is activated. Stop the programme?
~ Page 23
Is $ selected (Rinse Stop = no final spin)? ~ Page 23
Can the door only be opened by the emergency release?
~ Page 32
The programme will not start. Have you pressed the Ü button or selected Finish in 0 time?
Is the door closed?
Is the w childproof lock activated? Deactivate it.
If è flashes, the detergent drawer has not been pushed in com-
pletely. Push the detergent drawer in correctly.
The drum briefly jerks or judders
after the programme has started.
Not a fault – the internal motor test may cause the drum to jerk or
judder briefly when the wash programme starts.
The water is not draining. Is $ selected (Rinse Stop = no final spin)? ~ Page 23
Clean the drain pump. ~ Page 30
Clean the drain pipe and/or the drain hose.
Water is not visible in the drum. Not a fault – the water is below the visible area.
The spin result is not satisfactory.
Laundry is wet/too damp.
Not a fault – the unbalanced load detection system has inter-
rupted the spin cycle because the laundry is unevenly distrib-
uted.
Distribute small and large items of laundry evenly in the drum.
Is Less Ironing selected (depending on the model)?
~ Page 20
Is the selected speed too low?
The spin cycle runs several times. Not a fault – the unbalanced load detection system is adjusting an
imbalance.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WM14T640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WM14T640 in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens WM14T640

Siemens WM14T640 User Manual - German - 42 pages

Siemens WM14T640 User Manual - Dutch - 42 pages

Siemens WM14T640 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info