Manual Siemens VS08G1266 (page 11 of 77) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

76708

Zoom out

Zoom in

1/77

dede

Replacing the Hepa filter*

If your vacuum cleaner is equipped with a Hepa

filter, this should be replaced once a year.

(See figures 19 and 22 for changing the filter)

Replacing the activated carbon filter*

If your vacuum cleaner is equipped with a Hepa

filter and an activated carbon filter system, the

Hepa filter should be replaced yearly and the

activated carbon filter twice a year.

(see Figures 19, 21, 22 for changing the filters)

Care

Always switch off the vacuum cleaner and

disconnect the power cord from the mains

before cleaning the appliance.

The vacuum cleaner and plastic accessories

can be cleaned with a commercial plastic

cleaner.

Do not use a scourer, glass-cleaning

agent or multipurpose cleaning product.

Never immerse the vacuum cleaner in

water.

The dust compartment can, if necessary, be

cleaned with a second vacuum cleaner or

simply wiped with a dry cloth or dusting brush.

Subject to technical modifications.

Changing the micro-hygiene filter*

When should you change the micro-hygiene

filter? when starting a newpack of bags

(at least once every 5th dust bag change).

Figure

Ⅲ

Press the exhaust grille latch in the

direction of the arrow to unlatch the

exhaust grille and open it.

Ⅲ

Unlatch and remove the filter frame by

pressing the latch in the direction of the

arrow.

Figure

Ⅲ

Remove the foam and micro-hygiene filter.

Ⅲ

Dispose of the micro-hygiene filter and fit a

new micro-hygiene filter.

Ⅲ

Clean the foam and replace in the filter

frame.

If you have used the vacuum cleaner for fine

dust particles (such as plaster or cement),

clean the motor protection filter by tapping it

and, if necessary, replace the motor

protection filter and the micro-hygiene filter.

Figure

Ⅲ

Remove the activated carbon filter by

pulling a tab and dispose of it as normal

waste.

Ⅲ

Fit a new activated carbon filter.

Figure

Ⅲ

Slide the filter frame under the two retaining

ribs and push in the direction of the arrow

until it engages.

Ⅲ

Close the exhaust grille.

21*

20*

Depending on equipment

Figure

Seal the MEGAfilt

SuperTEX dust bag by

pulling the sealing strip and then remove it.

Figure

Insert a new MEGAfilt

SuperTEX dust bag

into the holder and close the dust bag

compartment lid.

Caution: The dust bag compartment

lid will only close when the

MEGAfilt

SuperTEX dust bag or textile

filter are inserted.

If the dust bag change indicator is still

lit after the dust bag has been changed,

please check whether the nozzle, tube

or flexible hose are blocked.

Cleaning the motor protection filter

The motor protection filter should be cleaned

regularly by knocking out the dirt and rinsing.

Figure

Ⅲ

Open the dust bag compartment lid

(see Figure 15).

Ⅲ

Pull out the motor protection filter in the

direction of the arrow.

Ⅲ

Clean the motor protection filter by

tapping it.

Ⅲ

If it is very dirty, the motor protection filter

should be rinsed.

The filter must then be left to dry for at

least 24 hours.

Ⅲ

After cleaning, slide the motor protection

filter into the vacuum cleaner and close the

dust bag compartment lid.

When the work is done

Figure

Ⅲ

Switch the vacuum cleaner off and unplug

the power cord from the mains.

Ⅲ

Tug the power cord and let go. The cable

then rewinds automatically.

Ⅲ

To reactivate or deactivate the cable brake,

quickly tug the power cord.

Ⅲ

On vacuum cleaners with an electronically

actuated cable rewind, the power cord

automatically rewinds when the machine is

unplugged at the socket.

Ⅲ

If you do not want the power cord to

rewind completely (e.g. when changing the

plug), you can apply the cable brake by

pulling the power cord.

Figure

To store or transport the vacuum cleaner,

use the storage aid on the underside of the

vacuum cleaner. Stand the vacuum cleaner

up on its end.

Slide the plastic lug on the floor into the

groove on the underside of the unit.

Changing the filter

Replacing the MEGAfilt

SuperTEX

dust bag

Figure

Ⅲ

If the dust bag change indicator lights up

brightly and evenly when the floor tool is

lifted from the carpet and the highest

suction power is selected, the dust bag

must be changed, even though it may not

yet be full. In this case it is essential to

change the dust bag due to the type of

material it contains.

Ⅲ

Turn the dust compartment locking lever in

the direction of the arrow to open the dust

compartment cover.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens VS08G1266 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens VS08G1266 Manual

Product: